Agilent (HP) 3488A

Multiplexer (Option 010/HP 44470A)

Option 010 is a 10-channel multiplexer for scanning or multiple signal connections. Channels switch 2 wires (Hi and Lo) with 2 PST relays for DVM inputs and other signals up to 250V and 2A. This module can also be used to multiplex signals to other switching functions, such as the matrix module.

General Purpose Relay (Option 011/HP 44471A)

This module consists of 10 SPST independent relays for general signal switching and control of external devices. Quality connections make this module ideal for switching signals when multiplexing is not required, or for supplying switchable power to the device under test.

VHF Switch (Option 012/HP 44472A)

The VHF module provides broadband switching for high-frequency and pulse signals. The 2 independent groups of bidirectional 1 X 4 switches can be used for signals from dc to 300 MHz. All channels have 50-ohm characteristic impedance and are break-before-make within a group of 4 channels. Each group is isolated from the other and from ground to prevent ground loops. Excellent isolation makes this module ideal for high-frequency signal analyzer measurements requiring a large dynamic range.

Matrix Switch (Option 013/HP 44473A)

Option 013 offers highly flexible switching with a 4 X 4, 2-wire matrix. Any combination of 4 input channels may be connected to any combination of 4 output channels. Each cross point or node in the matrix uses a 2SPST relay to switch 2 lines (Hi and Lo) at a time. Multiple 4 X 4 modules can be connected to form larger matrices. Multiplexers can be used in conjuction with this larger module to effectively expand the number of inputs and outputs of the matrix.

Digital I/O (Option 014/HP 44474A)

This module offers 16 very flexible bidirectional I/O lines and 4 TTL-compatible handshake lines for sensing and control of external devices. The digital inputs can be used to sense contact closures to ground. Each channel provides current sinks for remote switching of external relays, such as the HP 33311 series coaxial switches.

Breadboard (Option 015/HP 44475A)

The breadboard module provides a convenient way to implement custom circuits and special functions that interface directly to the HP 3488A's backplane control signals.

Microwave Switch (Option 016/HP 44476A)

This microwave switch furnishes 3 independent SPST 50-ohm coaxial switches with excellent performance from dc to 18 GHz. The 3 mm SMA connector allows you to easily connect cables for multiple system configurations.

Form-C relay (Option 017/HP 44477A)

This module provides 7 separate SPDT channels for general purpose switching and control of external devices. Using a power supply, this module can drive programmable attenuators and non-HP coaxial switches.

Microwave Switch (Option 018/HP 44478A)

The module brings multi-port 50-ohm coaxial switching to your test system. The module can mount any two HP3331XX coaxial switches. The HP coaxial relays come in 3-, 4-, and 5-port configurations-different switches for a variety of applications. HP coaxial switches that can be used are:

HP Coaxial Switch (Port) Frequency:

1.3 GHz 50-ohm Multiplexer (Option 019/HP 44478A) 1.3 GHz 75-ohm Multiplexer (Option 020/HP 44478B)

These modules bring bi-directional switching of signals from dc to 1.3 GHz, with high-channel isolation (>55 dB @ 1 GHz). Each module consists of 2 groups of 1 X 4 multiplexers. All test connections are made to BNC's on the module's edge. Off-channels can be resistively terminated.