Range | Output Voltage: 0 to 30V Output Current: 0 to 10A Output Power: 60W Overvoltage protection: 2 to 32V |
Accuracy | (at calibration temperature) Output Voltage: ± (0.04% of setting + 10 mV) Output Current: ± (0.1% of setting + 50 mA) Over Voltage Protection: ± (0.5 % of setting + 150 mV) |
Temperature coefficient | Output Voltage: (0.016% of setting + 2 mV) /K Output Current: (0.05% of setting + 2 mA) /K |
Long term drift | (in an 8 hour period) Output Voltage: 0.04% of setting + 5 mV Output Current: 0.05% of setting + 10 mA |
Programming Resolution | (12 bit) Output Voltage: 7.5 mV/LSB) Output Current: 2.5 mA/LSB) Over Voltage Protection: 7.5 mV/LSB) |
Source Effect | (for any line voltage change within rating) Voltage: ± (0.01% of setting + 2 mV) Current: ± (0.02% of setting + 2 mA) |
Load Effect | (load change 10% to 90% or 90% to 10% full load) Constant Voltage: ± (0.01% of setting + 5 mV) Constant Current: ± (0.02% of setting + 5 mA) |
Load cross regulation | Negligible for both voltage and current |
Output Noise (PARD) | Constant Voltage pp/rms (40 Hz to 30 MHz): 15 mV/3 mV Constant Current rms: 10 mA Switching Frequency: approx. 20 kHz |
013 | 30V 10A 60W Rear Output |
013Q | 30V 10A 60W Rear Output |
053 | 30V 10A 60W Front Panel Connector Option |
053Q | 30V 10A 60W Front Panel Connector Option |
113 | 60V 5A 60W Rear Output |
113Q | 60V 5A 60W Rear Output |
153 | 60V 5A 60W Front Panel Connector Option |
PM 9280/004 | Rack Mount Kit for PM 2811 |
Form Factor |
---|
Benchtop |
Connectivity |
---|
GPIB |
Current |
---|
10 A |
Power |
---|
60 W |
Type |
---|
SWITCHING |
Voltage |
---|
30 V |