Sorensen DLM 16-185E

DC Power Supply, 16 V, 185 A, 2960 W, Programmable

Units Available for Purchase

Units currently in stock, configurations vary - Request a Quote for Details
Description
The DLM 3 kW and 4 kW Series programmable DC power supplies are designed to provide highly stable, continuously variable output voltage and current for a  road range of applications in a compact 2U ( 3½ high) chassis.

The 4 kW power rating is new to the Sorensen Family of power supplies. Both the 3 kW and 4 kW models have output voltages from 0-5 VDC to 0-600 VDC and a current range from 0-5A to 0-450A. The output RMS noise is as low as 10 mV. The output will recover to 1% of its steady-state voltage within 1 ms for a step load change of 100% to 70% or 70% to 100%. The front panel layout makes the series extremely easy to use.

Control switches include: power on, enable/ standby and local/remote. Displays and indicators show programmed set points and operational control status. The programmed voltage, current and overvoltage set points are displayed with two large 3½ digit LED displays. Operational Status LEDs indicate power on, shutdown, overtemperature, overvoltage, constant current and voltage mode status. Control Status LEDs indicate front panel lockout, remote control and standby status. IEEE- 488.2 control LEDs indicate error, service request and remote address status. The 3 kW Models will accept 200*/230 VAC single phase and 200*/208 VAC three phase input power. The 4 kW Models will accept 200*/208 VAC, three phase or optional 400 or 480 VAC three phase input power.
List of Options
105-300-26 Rackslide Kit
5361969-01 Paralleling Cable, one cable per slave unit
M1 345-455 VAC, 47-63 Hz, three phase, 3 wire plus ground. Delta or WYE may be used (4 kW only)
M13 Locking Shafts (front panel potentiometers)
M2 432-528 VAC, 47-63 Hz, three phase, 3- wire plus ground, Delta or Wye may be used (4 kW only)
M51A 5 Channel Optically Isolated Analog Control and Monitoring
M85 Multichannel 12 Bit Slave Interface
M9E IEEE-488.2 and RS 232 Interfaces (SCPI Programming Language)
Specifications & Attributes (DC Power Supplies)
Form Factor
Rackmount ( /105-300-26 )
Connectivity
GPIB ( /M9E )
RS232 ( /M9E )
Current
185 A
Power
2960 W
Type
SWITCHING
Voltage
16 V

Request a Quote