Rohde and Schwarz ZVA40
Network Analyzer
Contact us for pricing and availability.
Description
With its new R&S ZVA family of vector network analyzers, Rohde & Schwarz is taking a future-oriented approach. The analyzers offer a perfect balance between measurement speed, dynamic range, flexibility and precision, making them ideal for present and future measurement tasks.
Rohde & Schwarz previously set standards in RF and microwave measurements with its R&S ZVR family of network analyzers, and now continues this success with the R&S ZVA. The fundamental mixing concept employed by the receivers ensures high sensitivity and a wide dynamic range. Extremely fast synthesizers make for short measurement times. Its excellent characteristics, new functionality, sophisticated GUI and extremely high flexibility make the R&S ZVA an indispensable tool for demanding measurement tasks in labs and production.
- Multiport concept
- Highest network analyzer performance
- Versatile functionality
- High measurement speed
- Modern user interface (Windows)
- GPIB, LAN, USB
- Pulsed profile measurement option
- True differential Measurements option
Note: Image is of ZVA24
List of Options
| B-B18 | Removable Flash Disk 4GB for ZVA/ZVB with control unit FMR6/5 (factory installed only) |
| B-B18 | Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 |
| B-B18 | Removable hard disk 160GB (including firmware) for R&S® ZVA and R&S® ZVB with FMR7 |
| B-B4 | Oven quartz (OCXO) for ZVA, ZVB, ZVT |
| B-K2 | Time domain (for ZVA, ZVB, ZVT) (software license) |
| B-K30 | Noise figure measurement on 2 port devices (for ZVA and ZVT, |
| B16 | Direct Generator and Receiver Access for 2 Ports |
| B18 | Removable Flash Disc |
| B21 | Generator Step Attenuator Port 1; mechanical, 70dB in 10dB-steps |
| B22 | Generator Step Attenuator Port 2; mechanical, 70dB in 10dB-steps |
| B23 | Generator Step Attenuator Port 3; mechanical, 70dB in 10dB-steps, 40 GHz |
| B24 | Generator Step Attenuator Port 4; mechanical, 70dB in 10dB-steps, 40 GHz |
| B31 | Receiver Step Attenuator Port 1; mechanical, 35dB in 5dB-steps |
| B32 | Receiver Step Attenuator Port 2; mechanical, 35dB in 5dB-steps |
| B33 | Receiver Step Attenuator Port 3; mechanical, 35dB in 5dB-steps, 40GHz |
| B34 | Receiver Step Attenuator Port 4; mechanical, 35dB in 5dB-steps, 40GHz |
| B7 | Measurements on pulsed signals. Pulse Profile,Recording time up to 25ms, up to 30MHz bandwidth |
| B7 | Measurements on pulsed signals. Pulse profile,Recording time up to 25ms, up to 30MHz bandwidth |
| B8 | External attenuator control. Control unit for electronic attenuators of ZVAZ90E, ZVA-Z110E |
| C3 | hree years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| C3 | Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| C5 | Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| C5 | Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
| DCV-2 | Documentation of calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| K10 | Group delay measurement on converters without LO access. For long distances via LXI network of 2 ZVA or ZVT. |
| K17 | Increases the receiver bandwidth to 5MHz (software license) |
| K2 | Time domain (for ZVA, ZVB, ZVT) |
| K27 | Two internal pulse generators (for ZVA and ZVT) (software license) |
| K4 | Mixer- and frequency converting measurements for ZVA and ZVT (software license) |
| K5 | Vector corrected mixer measurements (for R&S®ZVA, R&S®ZVT; R&S®ZVA/T-B16 and R&S®ZVA-K4 required) |
| K6 | True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
| K7 | Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
| K8 | Control of frequency converters (for ZVA with f>20 GHz, ZVT20, includes ZVA-K4) |
| K9 | Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
| R3 | Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| R3 | Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
| R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
Specifications & Attributes (Network Analyzers)
| Form Factor |
|---|
| Benchtop |
| Frequency |
|---|
| 300 KHz - 40 GHz |
| Type |
|---|
| Vector Network Analyzer (VNA) |