Description
The Rohde FSIQ is the one box solution in signal analysis. Spectrum analysis with ultrawide dynamic range for sophisticated ACPR measurements: NF = 15 dB/ TOI = +20 dBm (FSIQ7) Integrated vector signal analyzer for universal analysis of digital and analog modulated signals BPSK to 16QAM, (G)MSK, AM, FM, PM
Vector signal analyzer for W-CDMA/3GPP Symbol rate up to 6.4 Msymbol/s
High-speed synthesizer with 5 ms sweep time for FULL SPAN (FSIQ 3/7)
High display update rate up to 25 sweeps/s Large colour display with high resolution (24 cm/9.5" TFT) 75 dB ACPR for Wideband-CDMA 82 dB ACPR in alternate channel for Wideband-CDMA True RMS detector for precise and repeatable measurements of any signal type.
Features
3 models and frequency ranges
FSIQ 3: 20 Hz to 3.5 GHz
FSIQ 7: 20 Hz to 7 GHz
FSIQ 26: 20 Hz to 27 GHz
Resolution bandwidth 1 Hz to 10 MHz in 1/2/3/5 steps
5-pole resolution filters with high selectivity
FFT filter with 1 Hz to 1 kHz RBW for fast measurements
Displayed average noise floor typ.
-150 dBm in 10 Hz bandwidth
Third-order intercept +20 dBm with FSIQ 7, +22dBm with FSIQ26
Phase noise -150 dBc/Hz at 5 MHz offset
75 dB ACPR dynamic range for W-CDMA (4.096 MHz integration BW)
Total measurement uncertainty <1 dB up to 2.2 GHz, <1.5 dB up to 7 GHz
RMS detector for high-precision power measurements irrespective of waveform
Fast spectrum analysis with 5 ms sweep time for full span (FSIQ3/7)
Fast time domain analysis with 1 µs zero span sweep time
Integrated broadband vector signal analyzer for all main mobile radio standards and modulation modes with versatile result display: I and Q signal, magnitude and phase, vector and constellation diagrams, spreadsheets with numeric evaluation of modulation errors and demodulated bit sequence.
List of Options
1R |
Rack mount Adapter ZZA-94 |
B10 |
Tracking Generator |
B11 |
Tracking Generator 7 GHz with I/Q Generator |
B12 |
Switchable Attenuator for Tracking Generator |
B13 |
1DB ATTENUATOR |
B16 |
ETHERNET INTERFACE |
B17 |
2nd IEC/IEEE BUS INTFACE |
B21 |
External Mixer |
B22 |
Increased Level Accuracy to 2 GHz |
B23 |
741.4MHZ IF OUTPUT REAR PANEL |
B4 |
Low Phase Noise |
B5 |
FFT Bandwidths 1 Hz to 1 KHz |
B7 |
Vector Signal Analyzer |
B70 |
Record and Transmit I/Q data via remote control |
DKD |
DKD CERTS |
K10 |
GSM MS Analyzer |
K11 |
GSM Application S/W (BTS) |
K20 |
EDGE Mobile Test |
K21 |
EDGE Base Station Test |
K3 |
Noise Figure Measurement Software |
K30 |
850 MHz band for Base Station Test |
K31 |
850 MHz Band for Mobile Test |
K4 |
PHASE NOISE MEASUREMENT SOFTWARE |
K71 |
IS-95 CODE POWER |
K72 |
3GPP Base Station Test |
K73 |
3GPP Mobile Test |
K74 |
3GPP Base Station Test |
Specifications & Attributes (Spectrum Analyzers)
Form Factor |
Benchtop
|
Portable
|
Application Software |
Noise Figure
( /K3 )
|
Phase Noise
( /B4 )
|
W-CDMA
|
Average Noise Level |
-150 dBm
|
Frequency |
20 Hz - 26.5 GHz
|