Rohde and Schwarz FSQ8

RF Spectrum Analyzer and Signal Analyzer 20 Hz - 8 GHz
Contact us for pricing and availability.
Description
Key Facts The Signal Analyzer R&S FSQ combines two instruments in one. It offers signal analysis at a demodulation bandwidth of up to 120 MHz with the dynamic range of a high-end spectrum analyzer. Features
  • Frequency range: 20 Hz to 3.6 GHz, 8GHz, 26,5GHz and 40 GHz
  • Dynamic range of a high-end spectrum analyzer
  • TOI + 25 dBm, typ.
  • 1 dB compression +13 dBm, typ.
  • 84 dB ACLR/3GPP with noise correction
  • 28 MHz demodulation bandwidth (optional 120 MHz)
  • 16 Msample I and Q memory
  • Application firmware for digital demodulation measurement
  • Bluetooth
  • GSM/EDGE
  • 3 GPP WCDMA, HSDPA, TD-SCDMA
  • CDMA2000, 1xEV-DV, 1xEV-DO
  • WLAN 802.11a/b/g/j
  • WiMax IEEE 802.16-2004,802.16e
  • General purpose vector signal
List of Options
B10 External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of
B100 I/Q memory extension 235 Msamples Extendable up to 705 Msamples (Not retrofittable, excludes FSP-B10)
B102 I/Q memory extension Extends FSQ-B100 to 705 Msamples (FSQ-B100 required)
B12 Output attenuator for tracking generator for FSU, FSQ
B17 Digital Baseband Interface Not retrofittable
B18 Removable Hard Disk (not retrofittable)
B19 Second Hard Disk for FSQ-B18 (for FSQ-B18, variant 1303.0400.03)
B25 Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ
B28 Trigger port for FSP,FSQ,FSU; for indication of trigger conditions
B33 USB mass memory write protection, disables writing to USB memory sticks (ex factory only)
B4 OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR
B4 OCXO 10 MHz aging/year: 0.35*10E-7.
B5 Output for low phase noise 640MHz reference signal for FSU3, FSU8, FSQ3 und FSQ8
B512 CPU RAM upgrade to 512 MB for instruments with CPU board 1091.2520
B71 Analogue base band inputs 50 Ohm/1M Ohm input impedance information bandwidth 36 MHz
B72 Bandwidth extension for IQ-Demodulation and Vectorsignalanalysis 120MHz IQ bandwidth.
B88 RF hardware option 1 FSU8/FSQ8
B9 Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz
C3 Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5 Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
DCV-2 Documentation of calibration values
DCV-ZP Printout of DCV (additional, in combination with DCV-Option only)
DKD FSQ8 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device)
EX-IQ-BOX Digital I/O adapter module for AFQ, AMU, FMU, FSG, FSQ, SMJ, SMU (AFQ-B18, AMU-B17, AMU-B18, FSQ-B17,
FS-B33 USB mass memory write protection, disables writing to USB memory sticks (ex factory only)
FS-K10 GSM/EDGE/EDGE Evolution Measurement Appl (for FSG/FSQ/FSU)
FS-K110 Analysis of TETRA II / TEDS signals (for FSQ, FSU with option FSU-B73)
FS-K15 VOR/ILS measurements for FSMR
FS-K30 Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU
FS-K40 Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU
FS-K5 Application firmware GSM/EDGE tests for FSP, FSU, FSQ
FS-K5U Upgrade of FS-K5 to FS-K10, GSM/EDGE/EDGE Evolution Measurement Appl (for FSG, FSQ, FSU)
FS-K7 FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU)
FS-K72 Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ
FS-K73 Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ
FS-K73+ 3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP,
FS-K74 3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ
FS-K74+ 3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG;
FS-K76 3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU
FS-K77 3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU
FS-K8 Application firmware for Bluetooth measurement on FSP, FSU and FSQ
FS-K82 CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ
FS-K83 CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU
FS-K84 1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ
FS-K85 1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU
FS-K9 Measurements with NRP power sensors NRPZ11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4
FSP-B10 External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of
FSP-B28 Trigger port for FSP,FSQ,FSU; for indication of trigger conditions
FSU-B12 Output attenuator for tracking generator for FSU, FSQ
FSU-B25 Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ
FSU-B4 OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR
FSU-B5 Output for low phase noise 640MHz reference signal for FSU3, FSU8, FSQ3 und FSQ8
FSU-B9 Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz
K100 EUTRA/LTE downlink, application firmware
K100 EUTRA/LTE downlink, application firmware
K101 EUTRA/LTE uplink, application firmware
K101 EUTRA/LTE uplink, application firmware
K102 EUTRA/LTE Downlink, MIMO. PC software for FSG and FSQ (FSQ-K100 required)
K102 EUTRA/LTE Downlink, MIMO. PC software for FSG and FSQ (FSQ-K100 require
K104 Analysis of EUTRA/LTE TDD downlink signals (for FSG, FSQ)
K105 Analysis of EUTRA/LTE TDD uplink signals (for FSG, FSQ)
K3 Noise Figure Measurement Software
K30 Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU
K4 PHASE NOISE MEASUREMENT
K40 Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU
K5 Application firmware GSM/EDGE tests for FSP, FSU, FSQ
K7 FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU)
K70 Vector signal analysis for FSQ; 28 MHz demodulator-BW FSK, MSK, PSK,
K72 Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ
K73 Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ
K74 3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ
K76 3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU
K77 3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU
K8 Application firmware for Bluetooth measurement on FSP, FSU and FSQ
K82 CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ
K83 CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU
K84 1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ
K85 1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU
K9 Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4
K90 Application firmware WLAN 802.11A TX tests (EMV, flatness, mask) for FSQ
K90U Upgrade from FSQ-K90 to FSQ-K91, 802.11A,B,G,J TX tests requires 512 MB memory
K91 Application firmware WLAN 802.11A,B,G,J TX tests requires 512 MB memory
K91N Upgrade of FSQ-K91 to 802.11n
K92 Application firmware WIMAX (802.16-2004) TX measurements
K92U Upgrade of FSQ-K92 to FSQ-K93
K93 Application firmware for WIMAX IEEE 802.16e, WIBRO
K94 Application firmware for WIMAX IEEE 802.16e-2005 MIMO
K96 Generic OFDM measurement demodulator. Selectable pilot and data carriers and modulation type
Q3-DKD ISO 9000 Calibration / data
R3 REPAIR SERVICE 3 YEARS
R5 Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
U100 I/Q memory extension 235 Msamples, extandable up to 705 Msamples (for retrofitting)
U2 Upgrade kit to Win XP and 512 MB CPU RAM
U3 CPU board upgrade and 1.5GB memory extension for FSQ with flash drive FSQ-B18
Z2 Compact Keyboard with Trackball
Z4 DC Block 10 KHz - 18 GHz N Connector 50 Ohm, 50 VDC
Z5 2.4 mm Test Port Adapter
ZZA-411 19" adapter, 4 HU, 1/1 for BW2000 cabinets
Specifications & Attributes (Spectrum Analyzers)
Form Factor
Benchtop
Plug-In ( /EX-IQ-BOX )
Application Software
Bluetooth ( /K8 )
CDMA2000 ( /K82 )
CDMAONE ( /K82 )
GSM with Edge ( /K5 )
HSDPA ( /K74 )
MIMO (802.11n) ( /K102 /K91N /K94 )
Noise Figure ( /K3 )
Phase Noise ( /K4 )
TD-SCDMA ( /K77 )
Frequency
10 MHz ( /B4 )
28 MHz ( /K70 )
36 MHz ( /B71 )
120 MHz ( /B72 )
640 MHz ( /B5 )
10 MHz - 3.6 GHz ( /B25 )
20 Hz - 8 GHz

Request a Quote