| ATV-VIDEO | Analog TV test patterns additional test signals PAL/NTSC/SECAM ser.no. required |
| B110 | High SNR FM Frontend not with ETL-B210, ETL-B215, ETL-B216, ETL-B300 or ETL-B310 |
| B201 | Additional Interfaces Digital TV not with FSL-B5 |
| B203 | RF Preselector with additional 75 Ohm RF input (retroffitting by factory) |
| B209 | Harddisk 80 Gbyte (retrofitting by service) |
| B210 | Digitaler demodulator for single carrier |
| B215 | Digital demodulator for DTMBD |
| B216 | Digital demodulator for single carrier and DTMB |
| B230 | DC Power Supply 11 V to 19 V |
| B235 | Li-Ion Battery Pack 10 Ah with battery charger (not with ETL-B280) |
| B280 | MPEG Processing Board (retrofitting by service) |
| B281 | Video and Audio Hardware Decoder Video: SDTV, MPEG-2, H.264 ETL-B280 required |
| B300 | FPGA Extension board not with ETL-B110, ETL-B210, ETL-B215, E and ETL-B310 |
| BCDRIVE | Broadcast Drive Test Software for ETL; requires ETL-K208 |
| C3 | Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 | Five years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV | Documentation of ETL calibration values |
| DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
| DV-DVBH | DVB-H stream library Ser.no.of basic unit required |
| DV-H264 | H.264 Stream Library SD, HD; MPEG-1 LII, AC-3 Serial number of basic unit required |
| DV-HDTV | HDTV sequences DVB and ATSC, Sr.nr. required DVG: parallel cable required |
| DV-ISDBT | ISDB-T transport stream library Ser.no.of basic unit required |
| DV-TCM | Test Card M sequences DVB and ATSC; Sr.nr. required DVG: parallel cable required |
| FSL-B10 | GPIB interface |
| FSL-B30 | DC power supply 12 - 28 V |
| FSL-B31 | NiMH battery pack |
| FSL-B4 | OCXO reference frequency |
| FSL-B5 | Additional interfaces video/IF-output, power meter 28 V - DC for noise source |
| FSL-B7 | Narrow resolution filters 10 Hz - 300 Hz |
| FSL-K7 | Analogue demodulation AM/FM/PM for FSL and for ZVL with ZVL-K1 |
| FSL-K9 | Power sensor measurements with NRP |
| FSL-K93 | Application Firmware for WIMAX# 802.16 OFDM/OFDMA Measurements (for R&S®FSL and R&S®ZVL w. R&S®ZVL-K1) |
| K110 | FM(Radio) Firmware ETL-B110 for SNR recommended |
| K111 | FM(Radio) Audio Analysis/Generator ETL-K110 and ETL-B201 mod.03 required |
| K202 | Analog TV Video Analysis |
| K203 | Analog TV Video Generator Multi standard |
| K208 | Measurement Log for digital TV |
| K210 | DVB-C firmware ETL-B210 or ETL-B216 required |
| K213 | J.83/B Firmware ETL-B210 or ETL-B216 required |
| K220 | ATSC/8VSB firmware |
| K221 | ATSC/8VSB SFN Frequency Offset R&S ETL-K220 required |
| K240 | DVB-T/H Firmware for ETL |
| K241 | DVB-T/H SFN frequency offset R&S ETL-K240 required |
| K250 | T-DMB/DAB Firmware for ETL |
| K251 | T-DMB/DAB SFN frequency offset ETL-K250 required. |
| K260 | ISDB-T Firmware |
| K261 | ISDB-T SFN frequency offset R&S ETL-K260 required |
| K280 | MPEG TS Generator/Recorder R&S ETL-B209 and R&S ETL-B280 required |
| K281 | HDTV and Dolby Upgrade ETL-B281 required |
| K282 | MPEG Analysis/Monitoring ETL-B280 required |
| K283 | In-depth analysis ETL-K282 required |
| K284 | Data Broadcast Analysis ETL-K282 required |
| K285 | TS Template monitoring ETL-K282 required |
| K320 | ATSC MDTV, ATSC/8VSB Firmware ETL-B300 or ETL-B310 required |
| K321 | ATSC MDTV, ATSC/8VSB SFN Freq. Offset ETL-K320 or ETL-K322 required |
| K322 | ATSC MDTV Upgrade ETL-K220 and ETL-B300 or ETL-B310 requir |
| K340 | DVB-T2 Firmware ETL-B300 required |
| R3 | Three years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 | Five years of depot repair coverage, including recalibration and test data if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| SFU-K222 | MediaFLO streams sgnals stress functions ser.no. required |
| SFU-K224 | ISDB-T Transport Streams brazilian ISDB-TB signals (H.264) ser.no. required |
| SFU-K225 | CMMB Transport Streams signals, stress functions ser.no. required |
| SFU-K226 | ATSC and ATSC Mobile DTV Streams video/audio signals, stress functions ser.no. required |