The Rohde & Schwarz (R&S) CMU200 Tester is part of a complete range of mobile radio test equipment, encompassing everything from conformance test systems to system simulators, turnkey functional board test/final test systems and simple sales-counter Go/NoGo testers.
The base unit with its standard-independent module test provides many general purpose measurement facilities for the development of all kinds of standards within its wide and continuous frequency range. If extended by the appropriate options, the R&S CMU200 Tester offers the hardware and software necessary to handle your 3G, 2.5G and previous generation testing applications, including analog.
The completely modular design of hardware and software components in the R&S CMU200 Tester eliminates unnecessary investments right from the start merely because a feature might be needed at some point in the future.
If an expansion becomes necessary because your needs grow, the modularity of the R&S CMU200 Tester concept will make this easy. Many expansions may be installed on site. You pay for them only when you need them.
The R&S CMU200 Tester brings premium cost effectiveness through a variety of features, with extremely fast measurement speed and very high accuracy being the two most important ones. In addition, the secondary remote addressing of the tester‘s modular architecture makes for intelligent and autonomous processing of complete measurement tasks and fast control program design.
Features and Specifications of the Rohde & Schwarz CMU200 include:
0-C3 | Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. |
0-C5 | Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. |
0-R3 | Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
0-R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
B11 | HW-option for CMU200: Reference oscillator OXCO, aging 2 X 10E-7/year |
B12 | HW-option for CMU200/300: Reference oscillator OXCO, aging 3.5x10E8/year |
B15 | HW-option for CMU200/300: Additional RF connections |
B17 | HW-option for CMU200: IQ/IF interface, analog, one channel |
B21 | HW-option for CMU200: Signalling Unit (GSM/GPRS/EDGE) |
B21 | HW option for CMU200: Universal signalling unit CMU-B21V14 incl. CMUB54 |
B41 | HW-option for CMU200: Audio generator and analyzer |
B52 | HW-option for CMU200: Speech codec |
B52 | HW-option for CMU200: Speech codec for CMU-B21/var. 14 |
B53 | HW-option for CMU200: Bluetooth extension for CMU-B21/var. 14 |
B54 | HW-option for CMU200 signalling module for AMPS, TDMA, GSM for CMUB21/var. 14 |
B55 | HW option for CMU200: (E)GPRS application testing with more than 2 UL-slots |
B56 | HW-option for CMU200: WCDMA and data E2E for CMU-B21/var. 14 |
B56 | HW option for CMU200 : 3GPP Signalling Module for HSPA application test |
B68 | HW-option for CMU200 layer 1-board (3GPP/FDD, DL+UL) |
B83 | HW option for CMU200: CDMA2000® signaling unit (requires R&S®CMUU65) |
B85 | HW-option for CMU200: 8K/8K ENH/13K speech codec for CDMA2000 signalling unit CMU-B83/V12 |
B85 | HW option for CMU200: 8k/13k CDMA Speech Codec. (Requires CMUB83/V22 and CMU-U65) |
B87 | Interface for CDMA2000® 1xRTT / 1xEV-DO data test for CDMA2000® signaling unit R&S®CMU-B83 |
B88 | HW-option for CMU200: 1xEV-DO extension for CMU-B83/V12 |
B89 | HW option for CMU200: 1xEV-DO Signalling Module (requires CMUB83/V22 and CMU-U65) |
B95 | HW-option for CMU200: Additional RF generator (max. input power 2 W) |
B96 | HW-option for CMU200: Additional RF generator, 2 channels for GSM, CDMA, WCDMA |
B99 | HW-option for CMU200: RF1 level range identical to RF2 RF1 2W max. |
DCV-2 | Documentation of calibration values |
DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
DKD | CMU200/300 DKD (ISO17025) calibration including ISO 9000 calibration (order only with device) |
K11 | SW-Option for CMU200: WCDMA signalling 3GPP / FDD / UE, Band L |
K14 | SW option for CMU200: Stereo FM Transmitter (Two tones only, one tone ist |
K15 | SW-Option for CMU200: WCDMA signalling 3GPP/FDD/UE, Band S (CMUB68,B21V14 bzw. V54,B56 necessary) |
K16 | SW-Option for CMU200: WCDMA signalling 3GPP/FDD/UE, Band 10 (CMUB68,B21V14 or V54,B56 necessary) |
K17 | SW-Option for CMU200: WCDMA signalling 3GPP/FDD/UE, Band >10 (CMU-B68,B21V14 or V54, B56 necessary) |
K20 | SW-option for CMU200: GSM400 for CMU-B21 |
K21 | SW-option for CMU200: GSM900 for CMU-B21 |
K22 | SW-option for CMU200: GSM1800 for CMU-B21 |
K23 | SW-option for CMU200: GSM1900 for CMU-B21 |
K24 | SW-Option for CMU200: GSM850 for CMU-B21 |
K26 | SW-option for CMU200: GT800 for CMU-B21 |
K27 | SW-option for CMU200: IS-136/cellular (800 MHz) for CMU-B21 |
K28 | SW-option for CMU200: IS-136/PCS (1900 MHz) for CMU-B21 |
K29 | SW-option for CMU200: Analog AMPS, for CMU-B21, CMU-B41 required |
K42 | SW-extension for CMU200: GPRS signalling, CMU-K2X required |
K43 | SW-extension for CMU200: EGPRS (EDGE) signalling CMU-K2X required |
K44 | Software option for CMU200: Dual transfer mode: Simultan. CS and PS connection |
K45 | SW-option for CMU200: Adaptive multirate signalling for GSM |
K46 | SW-Option for CMU200 : Wide Band Adaptive Multirate Signalling for GSM und WCDMA |
K47 | Software option for CMU200: Smart alignment (specific PA + RSSI routine) |
K48 | Software option for CMU200: I/Q versus SLOT measurement |
K53 | SW-option for CMU200: Bluetooth for CMU-B21, CMU-B53 required |
K54 | SW - Option for CMU200 : Bluetooth Audio Profile Support Handsfree and Headset Profiles |
K56 | SW option for CMU200: HSUPA 5.7Mbps 3GPP/FDD/UE, Rel.6 (CMUB68,B21V14 or V54,B56 necessary) |
K57 | SW option for CMU200: WCDMA signalling 3GPP/FDD/UE, Band 7 (CMUB68,B21V14 or V54,B56 necessary) |
K58 | SW option for CMU200: WCDMA signalling 3GPP/FDD/UE, Band 8 (CMUB68,B21V14 or V54,B56 necessary) |
K59 | SW option for CMU200: WCDMA signalling 3GPP/FDD/UE, Band 9 (CMUB68,B21V14 or V54,B56 necessary |
K60 | SW option for CMU200: HSDPA 14Mbps ext. 3GPP/FDD/UE, Rel.5 (CMUK64 necessary) |
K61 | Software option for CMU200: WCDMA-Signaling: 3GPP/FDD/UE, band 4 (CMU-B68, B21V14, B56 necessary) |
K62 | Software option for CMU200: WCDMA-Signaling: 3GPP/FDD/UE, band 5 (CMU-B68, B21V14, B56 necessary) |
K63 | Software option for CMU200: WCDMA-Signaling: 3GPP/FDD/UE, band 6 (CMU-B68, B21V14, B56 necessary) |
K64 | SW option for CMU200: HSDPA 3.6Mb/s 3GPP/FDD/UE, REL.5 (CMU-B68, B21V14, B56 necassary) |
K65 | SW-option for CMU200: WCDMA TX-test (3GPP/FDD/UL) CMU-U65 required |
K66 | SW-option for CMU200: WCDMA-generator (3GPP/FDD/Dl) CMU-U68/B68 required |
K67 | SW-option for CMU200: WCDMA-Signaling: 3GPP/FDD/UE, band 3 (CMUB68, B21V14, B56 necessary) |
K68 | SW option for CMU200: WCDMA-Signaling: 3GPP/FDD/UE, band 1 (CMUB68, B21V14, B56 necessary) |
K69 | SW option for CMU200: WCDMA-Signling: 3GPP/FDD/UE, band 2 (CMUB68, B21V14, B56 necessary) |
K83 | SW-option for CMU200: CDMA2000 (450 MHz band) for CMU-B83 |
K839 | SW OPTION for CMU200: 1xEV-DO Signalling, 450MHz band (requires CMU-B83/V22, CMU-B89) |
K84 | SW-option for CMU200: CDMA2000 (cellular band) for CMU-B83 |
K849 | SW OPTION for CMU200: 1xEV-DO Signalling, Cellular Band (requires CMU-B83/V22, CMU-B89) |
K85 | SW-option for CMU200: CDMA2000 (PCS band) for CMU-B83 |
K859 | SW OPTION for CMU200: 1xEV-DO Signalling, PCS Band (requires CMUB83/V22, CMU-B89) |
K86 | SW-option for CMU200: CDMA2000 (IMT2000 band) for CMU-B83 |
K869 | SW OPTION for CMU200: 1xEV-DO Signalling, IMT-2000 Band (requires CMU-B83/V22, CMU-B89) |
K87 | SW-option:CDMA2000® application-testing, requires R&S®CMU-B83, B87 and one option of R&S®CMU-K83 - K86 or |
K88 | SW-option for CMU200: 1xEV-DO extension (CMU-B88 and CMU-B83V12 required) |
K90 | SW option for CMU200: A-GPS C-Plane interface for 2G/3G/C2k incl. ATEControl.Application. |
K92 | Software option for CMU200: (E)GPRS application testing external PC WINXP/2000 required |
K96 | Software option for CMU200: WCDMA application testing |
PK100 | SW-Option for CMU200: GSM/GPRS/EGPRS + WCDMA + C2K + 1xEV-DO + AMPS + IS136 |
PK20 | SW OPTION for CMU200: GSM 400+850+900+1800+1900 and GPRS signalling |
PK60 | SW Option for CMU200: WCDMA-Sig.: 3GPP/FDD/UE, Tx-Test, Generator; all Bands |
PK80 | Software option for CMU200: CDMA2000-band 450 MHz + PCS + cellular + IMT2000; analog AMPS |
PK800 | SW Package for CMU200:1xEV-DO Signalling 450MHz, Cellular, PCS, IMT2000 BANDS (requires CMU-B83/V22, CMU-B89) |
U10 | HW modification for CMU200/300 Memory extension 256MB for speed improvement, CMU with FMR5 and FMR5+ |
U10 | HW modification for CMU200/300 Memory extension 256MB for speed improvement, CMU with FMR6 |
U10 | HW-modification for CMU200/300 memory extension for speed improvement for 64 MB-CMU |
U53 | Upgrade kit for CMU200: Bluetooth functionality (CMU-B21/var.02 required) |
U53 | Upgrade kit for CMU200: Bluetooth functionality (CMU-B21/var. 14 required) |
U56 | Upgradekit for CMU200: 3GPP Signalling Module Modification CMU-B56V14 to CMU-B56V54 |
U62 | HSDPA functionality 3.6 Mbit/s for CMU200V10 and 14 Mbit/s for CMU200V30 |
U65 | Upgrade kit for CMU200: Measurement DSP module for measurement speed improvement |
U68 | Modification kit for CMU200: Layer 1 board UL+DL (3GPP/FDD) WCDMA upgrade ser.no. < 102200 |
U80 | Modification kit: Trigger connector for GPS one |
U83 | Hardware Upgrade for CMU200 CMU-B83 Var.12/14 to CMU-B83 Var.22 (Return of CMU-B83 Var.12/14 required) |
U85 | HW Upgrade for CDMA Speech Codec CMU-B85 Var.12/14 to CMU-B85 Var.22 (Return of CMU-B85 Var.12/14 required) |
U96 | Upgrade for CMU200: Additional RF generator, 2 channels replacement of CMU-B95 (return) |
U99 | Upgrade kit for CMU200: RF1 level range identical to RF2, RF1 2W max. |
Z50 | Handset for CMU |