Tektronix TSG130A

Multiformat Signal Generator (television signal generator)
Contact us for pricing and availability.
Description
Features & Benefits Low Cost Test Signal Generator Tailored to Service Applications Supports Betacam, MII, S-VHS, Hi-8, GBR, and Composite Formats BNC and S-connector Outputs High Accuracy Test Signal Generation Two Channels of Audio Tone With Channel One Identification Compact and Lightweight Black Burst Output (Option) NTSC Test Signal Outputs Applications Component Analog Video Equipment Maintenance The TSG130A is a low cost, multiformat test signal generator tailored for the testing and servicing of Betacam, MII, S-VHS, Hi-8, NTSC and 525/60 GBR video equipment. The 10-Bit digital signal generation and internal architecture allow generation of signals with the accuracy and stability until now available only in higher cost generators. With the TSG130A, you get all the signals you need to test video levels, linearity, frequency response, phase response, clamp performance, chrominance noise, picture monitor alignment, inter-channel timing and more. For convenience in servicing S-VHS and Hi-8 VCRs, the TSG130A provides the NTSC and Y/C outputs simultaneously, with the Y/C outputs available both from BNC connectors and the standard 4-Pin S-connector. Two channels of 1 kHz audio tone are provided on balanced XLR outputs. These phase locked tones are easily identified with the selectable ID pulse in channel one. A dedicated black burst output is available as an option. This output is recommended for the service bench where an external reference signal is required for equipment fault diagnosis and adjustment. All this comes in a package size small enough not to clutter the service bench. And for field servicing, the TSG130A fits nicely in a briefcase with the rest of the necessary service tools. (Standard and all Options) NTSC, YC Test Signal Generator Luminance Amplitude Accuracy - ±1%. Chrominance Amplitude Accuracy (C Channel) - ±1%. Chrominance-to-luminance Gain - ±1%. Chrominance-to-luminance Delay - =15 ns. Frequency Response - ±2% to 4.2 MHz (NTSC output); ±1% to 5 MHz, ±2% to 5.5 MHz (all other outputs). SCH Phase Accuracy - 0° ±5°. Line Blanking Interval - 10.9 µs ±0.2 µs. Output Impedance - 75 O. Component Test Signal Generator Amplitude - Accuracy: ±1%. Channel to channel match: ±0.5% B-Y and R-Y relative to Y. Frequency Response - Y Channel: ±1% to 5 MHz, ±2% to 5.5 MHz. B-Y, R-Y Channels: ±1% to 2.75 MHz. Channel-to-channel Timing Match - Within 5 ns; B-Y and R-Y relative to Y. Sync Amplitude - Betacam: 285.7 mV. MII: 300 mV. Blanking Width - 10.9 ±0.2 µs. Output Impedance - 75 O. Internal Reference Frequency - 3.579545 MHz. Stability Over Temperature - Within 10 Hz from 5 °C to 35 °C. Audio Tone Generator Frequency - 1 kHz. Amplitude - 0 to +8 dBu into 600 O or a high impedance load. Distortion - =0.5% THD + N. Click ID - Rate adjustable from 0.2 Hz to 4 Hz. Power Source Mains - Voltage range: 90-130 VAC; 180-250 VAC. Frequency range: 48-62 Hz. Power Consumption - 15 W typical. Environmental Temperature - Operating: 0 °C to +35 °C. Nonoperating: -40 °C to +65 °C. Certifications EMC - Certified to the EMC Directive 89/336/EEC. Safety - Approved to: UL1244, CSA231. Complies with: EN61010-1, IEC61010-1.
List of Options
01 GENERATOR; MII SIGNAL LEVELS,RGB
02 Increase memory depth to 128K
03 GENERATOR SONY SPECIAL,RGB
04 GENERATOR MATSUSHITA SPECIAL,RG
2J GENERATOR 0% SETUP TEST SIGNALS
C3 Calibration Service 3 Years
C5 Calibration Service 5 Years
D1 Calibration Data Report
D3 Calibration Data Report 3 Years (with Option C3)
D5 Calibration Data Report 5 Years (with Option C5)
R3 Repair Service 3 Years (including Warranty)
R5 Repair Service 5 Years (including warranty)

Request a Quote