Fluke DSP-2000

Digital Cable Analyzer
Contact us for pricing and availability.
Description
The DSP-2000 CableAnalyzer:
  • Delivers TSB-67 Accuracy Level II for Basic Link and Channel as classified by
  • Underwriters Laboratories, Inc. (UL)
  • Provides auto-diagnostics of cabling faults in graphical and text representations
  • Tests NEXT from both ends to 155 MHz
  • Detects/excludes sources of noise from NEXT measurements
  • Provides fast test times: completes test of a 4-pair Cat 5 cable in 20 seconds
  • Stores 1,150 TIA TSB-67 test results and up to 3,000 fiber test results
  • Monitors traffic on 10BASE-T and 100BASE-TX networks to help you identify if the cable link is the source of the problem
  • Tests a wide variety of LAN cabling systems: UTP, FTP, STP (IBM type 1,2,6,9), Coax
  • Includes free Windowsr-based DSP-LINK software - the quick and easy way to upload cable test results to your PC
  • Provides input protection from live ISDN circuits
  • Has a bright, back-lit display for hard-to-see locations
  • Has a rugged, solid construction, built for the job site DSP-2000 CableAnalyzerTM Specifications:
  • Cable Types: UTP, FTP, ScTP, STP, Coax
  • Test Standards: TIA Cat 3, 4, and 5 Basic Link or Channel
  • ISO11801 Class A, B, C, or D
  • IEEE 10Base5, 10Base2, or 10base-T
  • IEEE Token Ring 4 Mbps or 16 Mbps
  • IEEE 100Base-TX, 100Base-T4
  • IEEE 802.12 (100VG-AnyLan) 4-UTP or 2-STP
  • ANSI TP-PMD
  • Aus/NZ Class C, D Basic Link or Channel
  • Speed of Autotest Full Autotest of Category 5 UTP cable, including 6 pair
  • combinations for NEXT in both directions, in less than 20 seconds.
  • Supported Tests: (range of test is determined by network or selected standard)
  • Wire Map
  • Length, Propagation Delay, Delay Skew
  • Attenuation
  • NEXT, NEXT @ Remote
  • Power Sum NEXT, PSNET @ Remote
  • Attenuation-to-Crosstalk Ratio (ACR), ACR @ Remote
  • Characteristic Impedance
  • DC Loop Resistance
  • Return Loss (RL), RL @ Remote
  • Cable Tone Generator: Tone generator can be detected by a handheld tone probe.
  • Display: Graphic bit-mapped LCD with back light and adjustable contrast
  • Test connections: Two shielded 8-pin modular connectors, RJ-45
  • Input Protection: Protected against continuous telco voltages and 100 mA over-current.
  • Occasional ISDN over-voltages will not cause damage
  • EMC: EMC compliant. CE certification by NMi Certin BV. Number.
  • Power: Main instrument and Smart Remote unit: Rechargeable NiCad battery with 10-12 hours typical battery life
  • Size: 22.5 x 13 x 7.6 cm (9 x 5 x 3 in)
  • Weight: 1.5 kg (3.25 lb)
  • Request a Quote