Description
The DCS Family of 1 kW, 1.2 kW and 3 kW programmable power supplies utilizes unique packaging techniques to achieve continuous full output power (1 kW, 1.2 kW or 3 kW) in any volt/amp combination within the rated output voltage and current limits in a low profile chassis., Demonstrated large installed base over a long period of time, the DCS family provides a highly reliable power platform.
This family has an easy-to-use front panel with 10-turn potentiometers to adjust voltage and current settings that are displayed simultaneously. LEDs indicate overtemperature, remote programming, shutdown and over voltage protection, status and constant-voltage/current mode operation. The DCS 3 kW Models have push button control of the output standby mode, OVP reset, remote/local programming and preview status of voltage, current and OVP setpoints.
The DCS family can also be controlled remotely. Four analog control modes are standard as well as isolated analog control (option). Computer control can be accomplished over IEEE488.2 GPIB (option) or LXI-compliant Ethernet (option)
List of Options
| M1 |
Factory configured for 115 VAC input (1 kW and 1.2 kW units only) |
| M13 |
Locking Knobs |
| M130 |
LXI Standard Compliant*Ethernet LAN/ RS-232C |
| M2 |
Factory configured for 230 VAC input (1 & 1.2 kW only) |
| M32 |
Master/slave paralleling cable configured for two or more units |
| M51A |
Isolated analog programming control of V/ I/OVP and isolated V/I monitor and status outputs up to 500V relative to the supply’s return line (May not be combined with M9C or M85) |
| M85 |
Multichannel slave interface allows use of a single GPIB address (using 1 master unit with M9C option) to control multiple units via a standard RS485 connector (3 ft. connector included) (May not be combined with M9C or M51A) |
| M9C |
IEEE-488 /RS-232C |
Specifications & Attributes (DC Power Supplies)
| Connectivity |
|
GPIB
( /M9C )
|
|
LAN
( /M130 )
|
|
LXI Compliant
( /M130 )
|
|
RS232
( /M130 /M9C )
|
