Kikusui PLZ164W

Electronic Load, 150V, 33A, 165W(CC/CV/CR/CP)
Contact us for pricing and availability.
Description
The PLZ-4W/4WA Series Electronic Loads are designed for integration in test systems for both characteristic and lifetime tests of a variety of DC power sources, such as switching power supplies, primary/secondary batteries, and Fuel Cell stacks.

The PLZ-4W series have six operation modes: Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Resistance + Constant Voltage (CR+CV).

The PLZ-4W/WA Series consists of four models plus a booster unit PLZ2004WB.
To achieve a large capacity system at low cost, the PLZ1004W can be connected in parallel with up to four booster units for a total power of maximum 9kW /1800A. Moreover, up to 5 units of the same model can be connected in parallel in a Master / Slave configuration.

With a high-performance current control circuit incorporated, the PLZ-4W/Wa series provide highly stable, high-speed operation. All models are standard equipped with GPIB, USB and RS232C Interface for esay remote control and system integration.

The PLZ-164WA accepts DC input voltages of 0V, making it ready for characterization of fuel cells.

  • Max. Operating Current: 33 A
  • Operating Voltage: 1.5 to 150 V
  • Power: 165 W
  • Type: 1
  • Rise time: 10 us (which converts to rise and fall times) high-speed response
  • Possiable to perform actual Load simulation by sequence control function
  • OV inp ut operating voltage type
  • Capable to work with:
    • constant-current
    • constant-resistance
    • constant-voltage
    • constant-power
    • combination of constant-current + constant-voltage
    • combination of constant-resistance + constant-voltage mode


The Kikusui PLZ164W, Multifunctional Electric Load, features faster rise/fall times with variable slew rates for transient testing on high speed DC/DC convertors and DC power supplies. WA versions offer OV inputs even at maximum rated current input enabling testing of single cell fuel cells. Test modes are constant current, constant resistance, constant voltage, constant power, or a combination of

List of Options
408J-101 GPIB cable, length: 1m
408J-102 GPIB cable, length: 2m
408J-104 GPIB cable, length: 4m
KBP3-2 Blank panel for KRA3 or150, width:1/2
KBP3-3 Blank panel for KRA3 or150, width:1/3
KRA150 Rack adapter (Metric size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More...
KRA3 Rack adapter (Inch size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More...
KRB150 Bracket (Metric size) More...
KRB150-TOS Bracket (Metric size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PAT
KRB3-TOS Bracket (Inch size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PATMore...
OP01-PLZ-4W Accessory Kit for PLZ-4W series. Used for the connection of J1 Connector on the rear panel when operating by external control. Contents: Connector, Semi-cover, Pin(20 sets), Ground cable
PC01-PLZ-4W The control signal cable for parallel operation of PLZ-4W series (Used for between Master/Slave units (PLZ-4W) or between PLZ2004WB Booster units) or PLZ6000R
PC02-PLZ-4W The control signal cable for parallel operation of PLZ-4W series, Used for between PLZ-4W Master unit and Booster unit (PLZ2004WB).
Wavy for PLZ-4W Sequence Creation Software for PLZ-4W seriesMore...
Specifications & Attributes (Electronic Loads)
Form Factor
Benchtop
Portable
Current
33 A
Power
165 W
Voltage
150 V

Request a Quote