Kikusui PLZ164WA

Electronic Load, 150V, 33A, 165W(CC/CV/CR/CP/Zero input)
Contact us for pricing and availability.
Description
The PLZ-4W/4WA Series Electronic Loads are designed for integration in test systems for both characteristic and lifetime tests of a variety of DC power sources, such as switching power supplies, primary/secondary batteries, and Fuel Cell stacks.

The PLZ-4W series have six operation modes: Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Resistance + Constant Voltage (CR+CV).

The PLZ-4W/WA Series consists of four models plus a booster unit PLZ2004WB.
To achieve a large capacity system at low cost, the PLZ1004W can be connected in parallel with up to four booster units for a total power of maximum 9kW /1800A. Moreover, up to 5 units of the same model can be connected in parallel in a Master / Slave configuration.

With a high-performance current control circuit incorporated, the PLZ-4W/Wa series provide highly stable, high-speed operation. All models are standard equipped with GPIB, USB and RS232C Interface for esay remote control and system integration.

The PLZ-164WA accepts DC input voltages of 0V, making it ready for characterization of fuel cells.

  • 0 to 150V
  • 33A
  • 165W
  • Rise time: 10 micro second(which converts to rise and fall times) high-speed response
  • Possible to perform actual Load simulation by sequence control function
  • Equipped with USB (Supplied as standard)
  • A 0(Zero)V input operating voltage


The Kikusui PLZ164WA, Electronic Load unit is a multifunctional system designed to offer the highest levels of reliability and safety with operation function of constant voltage, constant current, constant power and constant resistance mode. And its control unit comes with GPIB, RS232C and USB as standard equipment.
A 0(Zero)V input operating voltage which are suitable to meet the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices required for the lower operating voltage application. The Kikusui PLZ664WA, Multifunctional Electronic Load, offers the 132A at 0V input as a largest current rating in its class.
List of Options
408J-101 GPIB cable, length: 1m
408J-102 GPIB cable, length: 2m
408J-104 GPIB cable, length: 4m
KBP3-4 Blank panel for KRA3 or150, width:1/4
KBP3-5 Blank panel for KRA3 or150, width:1/5
KRA144 Rack adapter (Metric size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More...
KRA291 Rack adapter (Inch size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More...
KRB150-TOS Bracket (Metric size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PAT
KRB151 Bracket (Metric size) More...
KRB3-TOS Bracket (Inch size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PATMore...
OP01-PLZ-4W Accessory Kit for PLZ-4W series. Used for the connection of J1 Connector on the rear panel when operating by external control. Contents: Connector, Semi-cover, Pin(20 sets), Ground cable
PC01-PLZ-4W The control signal cable for parallel operation of PLZ-4W series (Used for between Master/Slave units (PLZ-4W) or between PLZ2004WB Booster units) or PLZ6000R
PC02-PLZ-4W The control signal cable for parallel operation of PLZ-4W series, Used for between PLZ-4W Master unit and Booster unit (PLZ2004WB).
TL01-PLZ Low inductance cable 50cm,140mH
TL02-PLZ Low inductance cable 1m,150mH
Wavy for PLZ-4W Sequence Creation Software for PLZ-4W Series
Specifications & Attributes (Electronic Loads)
Form Factor
Benchtop
Portable
Current
33 A
Power
165 W
Voltage
150 V

Request a Quote