The R&S ZVT8 is the first true 8 GHz vector network analyzer with up to eight test ports. Its design, operation, functions and specifications are very similar to those of an R&S ZVB without a display and front panel keypad. The R&S ZVT8 uses the R&S ZVB firmware.
A basic two-port R&S ZVT8 can be expanded to a vector network analyzer with up to eight ports by adding the appropriate options. If this is done, S-parameters of coaxial multiports (up to 8 ports) and mixed-mode S-parameters can be determined on balanced or symmetrical DUTs.
The R&S ZVT8 is primarily designed for system solutions in which it is remote-controlled via an IEC/IEEE bus or LAN. By adding an external monitor, mouse and keyboard to the R&S ZVT8, you can use it (like the R&S ZVB) as a mouse-operated standalone instrument in a lab environment by using pull-down menus.
Unlike conventional multiport solutions based on two- or four-port network analyzers with corresponding switching matrices, each port of the R&S ZVT8 has its own reflectometer with VSWR bridge, generator and measurement and reference receiver.
Each reflectometer can also be equipped with the Direct Generator/Receiver Access option. In this case, the generator and receiver paths are routed via the front panel by means of an removable 3.5 mm PC cable link. This option is comparable to the External Measurements option of the R&S ZVR family, additionally allowing direct access to the generator path before the reference receiver.
.C5 | Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. |
.R3 | Three years of depot repair coverage, including re-calibration if necessary to complete the repair. |
.R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. |
B16 | Direct generator/receiver access |
B63 | Additional Port 3 (Port 1 and Port 2 standard) |
B64 | Additional Port 4 (Requires Port 1 to Port 3) |
B65 | Additional Port 5 (Requires Port 1 to Port 4) |
B66 | Additional Port 6 (Requires Port 1 to Port 5) |
B67 | Additional Port 7 (Requires Port 1 to Port 6) |
B68 | Additional Port 8 (Requires Port 1 to Port 7) |
C3 | Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
DCV-2 | Documentation of calibration values |
DCV-ZP | Printout of DCV (additional, in combination with DCV-Option only) |
ZVA-B7 | Measurements on pulsed signals. Pulse profile,Recording time up to 25ms, up to 30MHz bandwidth |
ZVA-K10 | Group delay measurement on converters without LO access. For long distances via LXI network of 2 ZVA or ZVT. |
ZVA-K17 | Increases the receiver bandwidth to 5MHz |
ZVA-K27 | Two internal pulse generators (for ZVA and ZVT) |
ZVA-K4 | Frequency converting measurement for ZVA and ZVT |
ZVA-K5 | Phase measurement on mixers (for ZVA, ZVT; ZVA/T-B16 and ZVA-K4 required) |
ZVA-K6 | True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports |
ZVA-K7 | Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth |
ZVA-K9 | Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; |
ZVAB-B4 | Oven quartz (OCXO) for ZVA, ZVB, ZVT |
ZVAB-K2 | Time domain (for ZVA, ZVB, ZVT) |
ZVAB-K30 | Noise figure measurement on linear and frequency converting 2 port devices (for ZVA, ZBV and ZVT, |
ZVT8.C5 | Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
ZVT8.R3 | Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty |
ZVT8.R5 | Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
Form Factor |
---|
Benchtop |
Frequency |
---|
5 MHz ( /ZVA-K17 ) |
30 MHz ( /ZVA-B7 /ZVA-K7 ) |
300 KHz - 8 GHz |
Type |
---|
Vector Network Analyzer (VNA) |