Freedom from Limitations
WavePro 7 Zi-A excels in the way it offers general purpose utility never before seen in oscilloscopes from 1.5 to 6 GHz. All WavePro 7 Zi-A oscilloscopes contain selectable 50 Ω and 1 MΩ input capability. The 4 and 6 GHz models include both ProBus and ProLink input types which means eight probes can be attached and then multiplexed from the front panel or by remote control. The result— it's easy to hook up a passive probe even on 4 or 6 GHz models—no more frustration and hassle of trying to find a 1 MΩ input adapter. Plus, any existing investment in LeCroy probes, such as current probes, single-ended or differential active probes, or high voltage probes, is fully leveraged. Perfect.
More Triggers Isolate More Problems More Effectively
A powerful combination of high bandwidth Edge and 10 different SMART triggers allow you to isolate the problem quickly and begin to focus on the cause. Most SMART triggers allow triggering on pulse widths or features as small as 200 ps. A high-speed serial trigger enables triggering on up to 2.7 Gb/s serial patterns of up to 80-bits in length. Built-in hardware clock recovery is also included.
TriggerScan
TriggerScan uses high-speed hardware triggering capability with persistence displays to capture only the signals of interest and provide answers up to 100X faster that other methods. Traditional fast display update modes work best on frequent events occurring on slow edge rates while TriggerScan excels in finding infrequent events on fast edge rates.
WaveScan™ Advanced Search and Analysis Finds Problems that Triggers Won't Find
The best trigger won't find all unusual events—a more powerful capability is sometimes needed. WaveScan provides the ability to locate unusual events in a single capture (i.e., capture and search) or "scan" for an event in many acquisitions over a long period of time. Select from more than 20 search modes (frequency, rise time, runt, duty cycle, etc.), apply a search condition and begin scanning. When an event is found, WaveScan highlights the error on screen and displays a table listing the errors.
Fully Integrated Mixed Signal Oscilloscope (4+36) Option
Add Mixed Signal Oscilloscope (MSO) operation using the MS Series mixed signal options. These convenient add-ons connect to the LeCroy LBUS and quickly and simply provide capability to acquire up to 36 digital lines time-correlated with analog waveforms. No time is wasted in trying to learn how to connect, synchronize or operate a complicated logic analyzer since the MSOs are already completely integrated into the scope operation. In addition to acquiring digital lines, they are also helpful for monitoring low-speed signals, such as serial data clock, data, and chip select signals, thus preserving the analog channels for higher speed requirements.
LeCroy — The Acquisition Memory Leader
LeCroy has found a way to make long acquisition memory seamless and pain free to use. The WavePro 7 Zi Series' proprietary X-Stream II architecture supports capturing, zooming, measuring and analyzing multiple waveforms at 256 Mpts deep. What you experience is performance gains of 10–20X over what is available today. Whether looking at the acquired signal or while analyzing several screens of statistics, tracking a frequency or identifying complex patterns the WavePro 7 Zi is designed to perform.
Instantaneous Responsiveness
The first time you use the Zi oscilloscope you will experience responsiveness that you've never seen before. Acquiring and manipulating the longest record lengths and the most complex WaveShape Analysis are all easily handled at the same time. Whether you use the front panel or choose to make adjustments with a mouse or the touch screen, the system performs.
X-Stream II Architecture
Optimized for Fast Throughput
Designed for long memory operation and responsiveness X-Stream II technology enables high throughput of data—even when the oscilloscope is performing multiple 100 Mpts waveforms. It does so by eliminating the trade-offs between long memory length and quick processing. WavePro 7 Zi's proprietary architecture design is augmented with an Intel® Core™ 2 Quad processor, high-speed serial data buses, a 64-bit OS and up to 8 GB of RAM.
Optimized for Long Memory
By using variable waveform segment lengths to improve the CPU cache memory efficiency the WavePro 7 Zi is designed for the fastest processing of long waveform records. The result—10-20 times faster processing compared to other oscilloscopes.
Optimized for Responsiveness
By dynamically allocating buffers where to maximize memory availability the WavePro 7 Zi Series embodies the fastest front panel responsiveness. Waveform previewing shows interim calculation results while a built in processing abort make front panel control changes instant by stopping the current process and allowing new waveforms to be positioned or zoomed—all without a lengthy recalculation.
Digital Filter Software Package (WPZi-DFP2)
DFP2 lets you implement Finite or Infinite Impulse Response filters to eliminate undesired spectral components, such as noise, and enhances your ability to examine important signal components. You can choose from a standared set of FIR or IIR filters. You can also design your own filters.
Spectrum Analyzer Analysis Package (WPZi-SPECTRUM)
The spectrum converts the controls of your oscilloscope to those of a spectrum analyzer. Adjust the frequency span, resolution and center frequency. Apply filtering to your signal and watch the frequency signature change in real time. A unique peak search labels the spectral components and presents frequency and level in a table. Touch any line jump to that peak.
Mixed Signal Oscilloscope Option (MS-250/MS-500)
The Mixed Signal option allows the WavePro 7 Zi to convert to a mixed signal oscilloscope with up to 36 digital channels. Channels are sampled at 2 GS/s up to 50 Mpts/Ch. Having up to 36 digital inputs timesynchronized with four analog channels extends the oscilloscope's use to provide a total system view.
Jitter and Timing Analysis Package
Specialized timing parameters measure period, cycle-cycle, half period, width, etc. jitter on a variety of signals. Use the three views of jitter (statistical, time, and frequency) to understand root cause and to debug problems. Histograms provide understanding of statistical distributions. Tracks provide a means to show time-correlated peaks of jitter, and compare to other signals. FFTs provide the ability to debug root causes of high in-circuit jitter.
20dB-SMA-Attenuator | 20 dB SMA Attenuators |
ENET-2ADA-BNCSMA | Adapter Set- 2 BNC/M to SMA/F |
ENET-2CAB-SMA018 | Cable Set- 2 SMA-SMA 18 inches |
ENET-2CAB-SMA036 | Cable Set- 2 SMA-SMA 36 inches |
GPIB-2 | IEEE 488 GPIB Interface |
KYBD-1 | Keyboard, USB |
LSIB-CABLE-3M | PCI Express x 4 3-meter cable with x4 cable connectors included |
LSIB-CABLE-7M | PCI Express x 4 7-meter cable with x4 cable connectors include |
LSIB-HOSTBOARD | PCI Express x4 Host Interface Board for desktop PC |
LSIB-HOSTCARD | PCI Express x1 Express Card Host Interface for laptop Express Card slot |
MS-250 | 250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option |
MS-500 | 500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option |
MS-500-36 | 250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option |
MSO-3M | 18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002) |
MSO-DLS-36 | 16" Digital Lead Set, D18-D35 |
MSO-MICTOR | 36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD) |
MSO-MICTOR-SHROUD | Shroud for MSO-MICTOR connector, Kit of 3 |
PK400-1 | Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads |
PK400-2 | Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads |
PK400-3 | Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads |
QPHY-BroadR-Reach | QualiPHY Enabled BroadR-Reach Compliance Software Option |
QPHY-ENET | QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option |
QPHY-HDMI | QualiPHY Enabled HDMI Compliance Test Software |
QPHY-MIPI-DPHY | QualiPHY Enabled MIPI DPHY Compliance Software Option |
QPHY-PCIe | QualiPHY Enabled PCIe Gen1 and Gen2 Compliance Software Option |
QPHY-SATA-TSG-RSG | QualiPHY Enabled SATA (PHY, TSG, OOB and OOB) Compliance Software Option |
QPHY-USB | QualiPHY Enabled USB 2.0 Compliance Software Option |
QPHY-UWB | QualiPHY Enabled WiMedia UWB Compliance Software Option |
RACKMOUNT-1 | Rack-mount accessory for converting a WavePro Zi series oscilloscope to an 8U rack-mounted package |
Rise-Time-Filter-100ps | PSPL Rise Time Filter - PSPL Part Number 5915-110-100ps |
Rise-Time-Filter-150ps | PSPL Rise Time Filter - PSPL Part Number 5915-110-150ps |
Synchronize Oscilloscope Options Zi-8CH-SYNCH | HW Kit to allow combination of channels from two Zi or Zi-A oscilloscopes. Allows combination of allchannels from two oscilloscopes (8 channels total) or combination of all 20-30 GHz channels from two20-30 GHz 8Zi or 8Zi-A oscilloscopes (4 channels total), or combination of 45 GHz channels |
TF-ENET-B | 10/100/1000BaseT Ethernet Test Fixture |
TF-ET | Electrical Telecom Adapters |
TF-HDMI-3.3V-QUADPAK | HDMI Pull-Up Terminator Quad Pack - For Use with the Wilder-Tech HDMI-TPA-P Plug Test Adapter |
TF-SATA-C | SATA 1.5 Gb/s, 3.0 Gb/s and 6.0 Gb/s Compliance Test Fixture |
TF-SATA-C-Kit | SATA Compliance Test Kit |
TF-USB-B | USB 2.0 Compliance Test Fixture |
TTL-AUX-OUT | TTL Auxiliary output adapter for 7Zi and 8Zi oscilloscopes |
USB2-GPIB | External USB 2.0 to GPIB IEEE 488.2 adapter |
WPZi-1.5GHz-4X20GS | 20 GS/s (40 GS/s Interleaved) Sampling Rate Option for 1.5 GHz WavePro Zi |
WPZi-1553 TD | MIL-STD-1553 Trigger and decode option for WavePro Zi |
WPZi-500GB-HD | Upgrade from standard size hard drive to 500 GB hard drive |
WPZi-500GB-RHD-02 | Additional 500 GB Hard Drive for WPZi. Includes Windows Vista OS, LeCroy oscilloscope software andcritical scope operational file duplicates. |
WPZi-8-UPG-32GBRAM | 8 GB to 32 GB CPU RAM Upgrade Option |
WPZi-8B10B D | 8b10b Decode Option for WavePro Zi Series Oscilloscopes |
WPZi-A-L-128 | 128 Mpt/Ch (256 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A. |
WPZi-A-M-64 | 64 Mpt/Ch (128 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A. |
WPZi-A-S-32 | 32 Mpt/Ch (64 Mpt/Ch Interleaved) Memory Option for WavePro Zi-A. |
WPZi-AORM | Advanced Optical Recording Measurement Package for WavePro Zi Series |
WPZi-ARINC429bus DSymbolic | ARINC 429 Bus Symbolic Decode option for WavePro Zi |
WPZi-AudioBus TD | AudioBus trigger and decode for WavePro 7Zi |
WPZi-AudioBus TDG | AudioBus trigger, decode, and graph for WavePro 7Zi |
WPZi-CANbus TD | CAN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
WPZi-CANbus TDM | CAN Bus Trigger, Decode, and Measure Option for WavePro Zi Series Oscilloscopes |
WPZi-CBL-DE-EMBED | Cable De-Embedding Option for WavePro Zi Series Oscilloscopes |
WPZi-DDM2 | Disk Drive Measurements Software Package for WavePro Zi Series |
WPZi-DFP2 | Digital Filter Software Package for WavePro Zi Series |
WPZi-DigRF3Gbus D | DigRF 3G Bus Decode option for WavePro Zi |
WPZi-DigRFV4bus D | DigRF V4 Bus Decode option for WavePro Zi series |
WPZi-DPHYbus D | D-PHY Bus Decode option for WavePro Zi |
WPZi-DPHYbus DP | MIPI D-PHY CSI-2, DSI Bus Decode and Physical Layer test option for WavePro 7Zi series |
WPZi-EMB | Embedded bundle, Includes I2C TD, SPI TD, UART TD |
WPZi-EMC | EMC Pulse Parameter Software Package for WavePro Zi Series |
WPZi-ET-PMT | Electrical Telecom Pulse Mask Test Package for WavePro Zi Series |
WPZi-EYEDRII | Signal Integrity Toolkit - Channel & Fixture De-embedding/Emulation, Tx/Rx Equalization |
WPZi-EYEDRII-VP | Bundle - EyeDrII and VirtualProbe Toolkits |
WPZi-FCbus D | FibreChannel decode annotation option for WavePro 7Zi series |
WPZi-FlexrayBus TD | FlexRay Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
WPZi-FlexRayBus TDP | FlexRay Bus Trigger, Decode, and Physical Layer Test Option for WavePro Zi Series Oscilloscopes |
WPZi-HARDCASE | Hard carrying case for all WavePro Zi Series oscilloscopes |
WPZi-I2Cbus TD | I2C Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
WPZi-JITKIT | Clock, clock-data Jitter Analysis and views of time, statistical, spectral, and jitter overlay |
WPZi-LINbus TD | LIN Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
WPZi-MPHYbus D | MIPI M-PHY Bus Decode option for WavePro 7Zi series |
WPZi-MPHYbus DP | MIPI M-PHY Bus Decode and Physical Layer test option for WavePro 7Zi series |
WPZi-MSO-EMB | Embedded bundle, Includes MS-500-36 with I2C TD, SPI TD, UART TD |
WPZi-MSPT | 100 Mb/s to 1.25 Gb/s Medium Speed Serial Trigger Option for 2.5-3.5 GHz Oscilloscopesand Disk Drive Analyzers |
WPZi-PCIEbus D | PCI Express (Gen 1.x, 2.0, and 3.0) Protocol Link Layer Decode Annotation for WavePro 7 Zi SeriesOscilloscopes and Analyzers |
WPZi-PMA2 | PowerMeasure Analysis Software Package for WavePro Zi Series |
WPZi-PROTObus MAG | Serial Debug Toolkit - Measure Analyze Graph for WavePro ZiCompatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553 |
WPZi-ProtoSync | Decode Annotation and Protocol Analyzer Software Synchronization Option for WavePro Zi |
WPZi-ProtoSync-BT | Decode Annotation and Protocol Analyzer + Bit Tracer Software Synchronization Option for WavePro Zi |
WPZi-SASbus D | SAS Decode annotation option for WavePro 7Zi series |
WPZi-SATAbus D | SATA Decode option for WavePro ZiSupports SATA Gen 1, 2, and 3. |
WPZi-SDAIII | Single-Lane Serial Data Analysis Framework, Eye and Jitter Measurements |
WPZi-SDAIII-CompleteLinQ | Bundle - Multi-Lane SDA LinQ Framewk, incl. Eye, Jitter, Noise, Xtalk Meas, w/EyeDrII & VirtualProbe |
WPZi-SDAIII-CrossLinQ | Multi-Lane Serial Data Analysis LinQ Framework, Eye, Jitter, Noise and Crosstalk Measurements |
WPZi-SDAIII-Crosstalk | Single-Lane Serial Data Analysis Framework, Eye, Jitter, Noise and Crosstalk Measurements |
WPZi-SDAIII-LinQ | Multi-Lane Serial Data Analysis LinQ Framework, Eye and Jitter Measurements |
WPZi-SDM | Serial Data Mask Software Package for WavePro 7 Zi Series |
WPZI-SENTbus D | SENT Bus Decode Option for WavePro Zi |
WPZi-SOFTCASE | Soft carrying case for all WavePro Zi Series oscilloscopes |
WPZi-SPECTRUM | Spectrum Analyzer and Advanced FFT Option for WavePro Zi Series |
WPZi-SPIbus TD | SPI Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
WPZi-UART-RS232bus TD | UART and RS232 Bus Trigger & Decode Option for WavePro Zi Series Oscilloscopes |
WPZi-USB2-HSICbus D | USB 2.0 HSIC Decode Option |
WPZi-USB2bus D | USB 2.0 Bus Decode option for WavePro Zi |
WPZi-USB3bus D | USB 3.0 Decode option for WavePro ZiSupports USB 3.0, 2.0, 1.x |
WPZi-VBA | Vehicle Bus Analyzer BundleIncludes CAN TDM, CAN Symbolic, FlexRay TDP, LIN TD and Protobus MAG. |
WPZi-VIRTUALPROBE | Advanced De-embedding, Emulation and Virtual Probing Toolkit |
ZI-EXTDISP-15 | Top-Mounted, fully integrated 15.4" WXGA display, including all cabling and software |
Zi-FrontPanel | Removable front panel for WavePro 7Zi and WaveMaster 8Zi Oscilloscopes |
Zi-FrontPanel-4Ch | Removable front panel with 4 independent channel controlsFor use with WavePro 7Zi and WaveMaster 8Zi oscilloscopes |
Form Factor |
---|
Benchtop |
Bandwidth |
---|
250 MHz ( /MS-250 /MS-500-36 ) |
500 MHz ( /MS-500 ) |
1.5GHz |
Channels |
---|
4 CH |
18 CH ( /MS-250 /MS-500 ) |
36 CH ( /MS-500-36 ) |
Sample Rate |
---|
1 GS/s ( /MS-250 /MS-500-36 ) |
2 GS/s ( /MS-500 ) |
10 GS/s |
Type |
---|
Digital Storage (DSO) |
Mixed Signal (MSO) ( /MS-250 /MS-500 /MS-500-36 ) |