Description
The Rohde FSIQ is the one box solution in signal analysis. Spectrum analysis with ultrawide dynamic range for sophisticated ACPR measurements: NF = 15 dB/ TOI = +20 dBm (FSIQ7) Integrated vector signal analyzer for universal analysis of digital and analog modulated signals BPSK to 16QAM, (G)MSK, AM, FM, PM
Vector signal analyzer for W-CDMA/3GPP Symbol rate up to 6.4 Msymbol/s
High-speed synthesizer with 5 ms sweep time for FULL SPAN (FSIQ 3/7)
High display update rate up to 25 sweeps/s Large colour display with high resolution (24 cm/9.5" TFT) 75 dB ACPR for Wideband-CDMA 82 dB ACPR in alternate channel for Wideband-CDMA True RMS detector for precise and repeatable measurements of any signal type.
Features
3 models and frequency ranges
FSIQ 3: 20 Hz to 3.5 GHz
FSIQ 7: 20 Hz to 7 GHz
FSIQ 26: 20 Hz to 27 GHz
Resolution bandwidth 1 Hz to 10 MHz in 1/2/3/5 steps
5-pole resolution filters with high selectivity
FFT filter with 1 Hz to 1 kHz RBW for fast measurements
Displayed average noise floor typ.
-150 dBm in 10 Hz bandwidth
Third-order intercept +20 dBm with FSIQ 7, +22dBm with FSIQ26
Phase noise -150 dBc/Hz at 5 MHz offset
75 dB ACPR dynamic range for W-CDMA (4.096 MHz integration BW)
Total measurement uncertainty <1 dB up to 2.2 GHz, <1.5 dB up to 7 GHz
RMS detector for high-precision power measurements irrespective of waveform
Fast spectrum analysis with 5 ms sweep time for full span (FSIQ3/7)
Fast time domain analysis with 1 µs zero span sweep time
Integrated broadband vector signal analyzer for all main mobile radio standards and modulation modes with versatile result display: I and Q signal, magnitude and phase, vector and constellation diagrams, spreadsheets with numeric evaluation of modulation errors and demodulated bit sequence.
List of Options
| 1R |
Rack mount Adapter ZZA-94 |
| B10 |
Tracking Generator |
| B11 |
Tracking Generator 7 GHz with I/Q Generator |
| B12 |
SWITCHABLE ATTENUATOR |
| B13 |
1DB ATTENUATOR |
| B16 |
ETHERNET INTERFACE |
| B1604 |
Ethernet Interface (RJ45) |
| B17 |
2ND IEC/IEEE-BUS |
| B22 |
850MHZ GSM BASE STATION TESTS |
| B4 |
Low phase noise |
| B45 |
|
| B47 |
|
| B49 |
ETHERNET INTERFACE |
| B5 |
FFT Bandwidths 1 Hz to 1 KHz |
| B7 |
Vector Signal Analyzer |
| B70 |
EXTENDED MEMORY |
| D3 |
SERVICE TEST DATA REQUIRES C3 |
| K10 |
GSM MOBILE TEST FW |
| K11 |
GSM Application S/W (BTS) |
| K20 |
EDGE MOBILE MEASUREMENTS |
| K21 |
EDGE BTS MEASUREMENTS |
| K3 |
Noise Figure Measurement Software |
| K31 |
850MHZ GSM BASE STATION TESTS |
| K4 |
PHASE NOISE MEASUREMENT SOFTWARE |
| K71 |
IS-95 CODE POWER (REQUIRES B70) |
| K72 |
CODE POWER MEASUREMENTS |
Specifications & Attributes (Spectrum Analyzers)
| Form Factor |
|
Benchtop
|
|
Rackmount
|
| Application Software |
|
Noise Figure
( /K3 )
|
|
Phase Noise
( /B4 )
|
|
W-CDMA
|
| Average Noise Level |
|
-150 dBm
|
