| 1R |
Rack mount Adapter ZZA-94 |
| B1 |
Rugged case with variable carrying handle for all FSP models |
| B10 |
External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of |
| B15 |
Pulse calibrator for FSP excludes option FSP-B3 |
| B16 |
LAN interface 10/100 base T for FSP 1164.4391.XX and ESPI 1164.6407.XX |
| B18 |
Removable hard disk with WinXP (factory installed) |
| B19 |
Second hard disk for FSP-B18 incl. analyzer firmware for FSP with WinXP |
| B1G |
CPU RAM upgrade to 1GB. To upgrade FSP with CPU board (1091.2895.00) with less than 1GB |
| B20 |
Extended environment Spec, Random Vibration 1.9G / 0 - 55°C (not retrofittable) |
| B25 |
Electronic attenuator 0 - 30 dB, 5 dB steps, preamplifier only for FSP3/7 |
| B28 |
Trigger port for FSP,FSQ,FSU; for indication of trigger conditions |
| B29 |
20 Hz frequency extension to FSP3 and FSP7 Not retrofittable |
| B3 |
Audio demodulator AM/FM for FSP internal speaker, control and phones connection |
| B30 |
DC power supply 12 - 28 V for FSP spectrum analyzer and ESPI test receiver |
| B31 |
NiMH battery pack + charger for FSP and ESPI requires FSP-B1 and FSP-B30 |
| B32 |
Spare battery pack (NiMH) for FSP spectrum analyzer and ESPI test receiver |
| B33 |
Disabled USB ports, excludes FS-K9 |
| B4 |
OCXO 10 MHz for FSP |
| B6 |
TV trigger and adjustable RF power trigger (40 dB) for FSP |
| B70 |
Demodulator hardware and memory extension for FS-K72/FS-K73 on FSP |
| B9 |
Tracking generator for FSP 9 kHz - 3 GHz, I/Q modulator |
| C3 |
Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV-2 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| DKD |
FSP3 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| FS-B33 |
USB mass memory write protection, disables writing to USB memory sticks (ex factory only) |
| FS-K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
| FS-K40 |
Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU |
| FS-K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| FS-K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
| FS-K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73 |
Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ |
| FS-K73+ |
3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP, |
| FS-K74 |
3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K74+ |
3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG; |
| FS-K76 |
3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K77 |
3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU |
| FS-K8 |
Application firmware for Bluetooth measurement on FSP, FSU and FSQ |
| FS-K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
| FS-K83 |
CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU |
| FS-K84 |
1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ |
| FS-K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
| FS-K9 |
Measurements with NRP power sensors NRPZ11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
| K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
| K4 |
PHASE NOISE MEASURMENT SW |
| K40 |
Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU |
| K5 |
Application firmware GSM/EDGE tests for FSP, FSU, FSQ |
| K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
| K72 |
Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ |
| K82 |
CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ |
| K9 |
Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
| K90 |
Application firmware WLAN 802.11A TX tests (EVM, flatness, mask) for FSP |
| K93 |
Application firmware for WIMAX 802.16; OFDM/OFDMA measurements |
| PCK |
CABLE; 1 M, IEC/IEEE BUS |
| PSP-Z2 |
KEYBOARD: US, WITH TRACKBALL |
| R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| ZZA 478 |
RACK ADAPTER;19IN.(NOT FOR FSP-B1) |
