Ameritec AM44

Tests up to 5KHz.
Contact us for pricing and availability.
Description
What Is It? The Ameritec Model AM44 is a compact, user-friendly, yet powerful hand-held analog transmission test set. About the size of a personal organizer and weighing less than 2 lbs., it can easily be transported in a briefcase or slide into a tool kit. Powered by four AA batteries, an accessory 110 VAC adapter/recharger or four AA rechargeable NiCad batteries. The unit is designed for field testing and measurement of voice and data for 2 or 4 wire telecommunications transmission circuits. This unit is a full function signal generator able to generate all of the test tones and waveforms needed to perform a variety of standard measurements. It is a telephone set with built-in dial, talk and listen capability with a selection of 600 ohm or 900 ohm termination impedance. This unit fully complies with Bell Standard 41009. What Does It Do? The Ameritec Model AM44 can do a variety of measurements. With its built-in dial capability on dial-up networks it can access a distant responder or a second AM44 for centralized 2-wire testing. You can use a single unit with an Ameritec responder for centralized loop back testing. Or, use two sets for a complete end-to-end test of 4-wire data lines. In addition, the AM44 now combined with the new AM440 Remote Test Partnerâ„¢ is able to further enhance your testing capabilities. A single technician can test a circuit with an AM44, AM440 and a multi-meter. The AM44 can transmit to the AM440 and measure its signal and can take noise measurements. The combination of these two measuring instruments allows for DMM testing, including resistance testing and the measurements of both voltage and capacitance. How Does It Work? The user utilizes the color-coded controls and menu selection to select the desired measure mode and send mode. Measurements are captured and are automatically displayed. Immediate display indicates if the measurement is out of range "over" or "under". All controls are edge-mounted rocker switches or slide switches color coded with descriptive labeling on the front of the unit for all switch functions. The keypad which is normally used for dialing, has a unique secondary function which allows setting of all control parameters associated with the more complex tests. The keypad is also able to set signal generator levels and frequencies

Request a Quote