National Test Equipment

Rohde and Schwarz DVRM

26 DVB or 19 ATSC realtime measurements at a time Integrated long-term report Analysis of data rates Trigger-on-error function Remote control via supplied PC software 12 built-in relays for error signalling

R&S DVRM is controlled via the remote interface. It is designed for continuous operation, so all settings are stored in a non-volatile memory ensuring that the unit is immediately ready for operation again after a power failure. New remote settings are required only to modify operating parameters or read error statistics. R&S DVRM comes with a PC software ("MPEG2 Realtime Monitor") for remote control of the unit. The software runs under Windows 95/98 or Windows NT. It communicates with R&S DVRM via a serial interface (RS232) and offers a COM/DCOM software interface. Local control and display elements are not provided because R&S DVRM is intended for use in networked monitoring systems with one or several R&S DVRMs being integrated.

C3	Three years of Factory Standard, depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5	Five years of Factory Standard, depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
DRM-DCV	DOCUMENTATION OF DVRM CALIBRATION VALUES.
DV-B310	SMPTE310 interface for DVG/DVMD/DVRM/DVQ, replaces an ASI interface, rear,
DVS	Power splitter/combiner (0.1 - 400 MHz, 1 W, 50 Ohm, BNC-sockets)
R3	Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
R5	Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.