The Agilent 8496G dc to 4 GHz programmable step attenuator offers exceptional repeatability and reliability. Attenuation is provided in 10 dB steps from 0 to 110 dB. Precision gold-plated leaf springs ensure long life (over 5 million cycles) and very high attenuator repeatability (typically 0.01 dB). To improve measurement accuracy, NIST traceable data (SWR and attenuation) is available as Option 890. A maximum switching time of 20 ms (including contact settling) speeds automatic testing. Custom step attenuator/switch combinations are possible. The Agilent 11716A/B/C interconnect kits provide quick connection of Agilent 8494/5/6/7 1 dB and 10 dB step attenuators in series for greater dynamic range with 1 dB steps.
001 | Type N female connectors |
002 | SMA female connectors |
003 | APC-7 connectors |
008 | DC Ribbon Cable, 8" |
011 | 5 volt operation instead of std 24 volt |
016 | 14 pins dip plug, 16 inch DC ribbon cable |
024 | 24VDC operation |
060 | Viking to bare wire cable |
090 | Viking to bare wire cable |
890 | Calibration Data |
910 | Additional operating and service manual |
H50 | Less than or equal to 1.05 VSWR and std lab cal at 50MHz |
H60 | Less than or equal to 1.02 VSWR and std lab cal at 50MHz |
R-50C-011-3 | Agilent Calibration - 3 years |
R-50C-011-5 | Agilent Calibration - 5 years |
R-50C-021-3 | ANSI Z540-1-1994 Calibration - 3 years |
R-50C-021-5 | ANSI Z540-1-1994 Calibration - 5 years |
UK6 | Commercial cal. certificate w/ test data |
UKS | Certificate of Calibration |