Fluke PM2811

DC Power Supply, 30 V, 10 A, 60 W, Programmable

Units Available for Purchase

Units currently in stock, configurations vary - Request a Quote for Details
Description
Range Output Voltage: 0 to 30V
Output Current: 0 to 10A
Output Power: 60W
Overvoltage protection: 2 to 32V
Accuracy (at calibration temperature)
Output Voltage: ± (0.04% of setting + 10 mV)
Output Current: ± (0.1% of setting + 50 mA)
Over Voltage Protection: ± (0.5 % of setting + 150 mV)
Temperature coefficient Output Voltage: (0.016% of setting + 2 mV) /K
Output Current: (0.05% of setting + 2 mA) /K
Long term drift (in an 8 hour period)
Output Voltage: 0.04% of setting + 5 mV
Output Current: 0.05% of setting + 10 mA
Programming Resolution (12 bit)
Output Voltage: 7.5 mV/LSB)
Output Current: 2.5 mA/LSB)
Over Voltage Protection: 7.5 mV/LSB)
Source Effect (for any line voltage change within rating)
Voltage: ± (0.01% of setting + 2 mV)
Current: ± (0.02% of setting + 2 mA)
Load Effect (load change 10% to 90% or 90% to 10% full load)
Constant Voltage: ± (0.01% of setting + 5 mV)
Constant Current: ± (0.02% of setting + 5 mA)
Load cross regulation Negligible for both voltage and current
Output Noise (PARD) Constant Voltage pp/rms (40 Hz to 30 MHz): 15 mV/3 mV
Constant Current rms: 10 mA
Switching Frequency: approx. 20 kHz
List of Options
013 30V 10A 60W Rear Output
013Q 30V 10A 60W Rear Output
053 30V 10A 60W Front Panel Connector Option
053Q 30V 10A 60W Front Panel Connector Option
113 60V 5A 60W Rear Output
113Q 60V 5A 60W Rear Output
153 60V 5A 60W Front Panel Connector Option
PM 9280/004 Rack Mount Kit for PM 2811
Specifications & Attributes (DC Power Supplies)
Form Factor
Benchtop
Connectivity
GPIB
Current
10 A
Power
60 W
Type
SWITCHING
Voltage
30 V

Request a Quote