Description
The DHP family provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 400 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current. The DHP family uses control technology that allows 9 auto sequence steps, each step can be up to 99,999 seconds in duration. Combining all the steps allows a maximum auto-step program 27.7 hours long. Various voltages, currents and durations can be programmed for each step. This family has standard analog and a variety of combinations of IEEE-488.2, RS 232 and/or isolated analog input control interface options.
List of Options
M1 |
360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used |
M10 |
Both IEEE-488.2 and RS-232 |
M11 |
RS-232 and isolated analog programming |
M12 |
IEEE-488.2 and isolated analog programming |
M14 |
IEEE-488.2, RS-232 and isolated analog programming |
M2 |
432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used |
M51 |
Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems. |
M8 |
Internal RS-232 remote serial interface |
M9D |
Internal IEEE-488.2 interface |
Specifications & Attributes (DC Power Supplies)
Connectivity |
GPIB
( /M9D )
|
RS232
( /M8 )
|