Sorensen DHP400-7.5

DC Power Supply, 400 V, 7.5 A, 2800 W, Programmable
Contact us for pricing and availability.
The DHP family provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 400 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current. The DHP family uses control technology that allows 9 auto sequence steps, each step can be up to 99,999 seconds in duration. Combining all the steps allows a maximum auto-step program 27.7 hours long. Various voltages, currents and durations can be programmed for each step. This family has standard analog and a variety of combinations of IEEE-488.2, RS 232 and/or isolated analog input control interface options.
List of Options
M1 360-440 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
M10 Both IEEE-488.2 and RS-232
M11 RS-232 and isolated analog programming
M12 IEEE-488.2 and isolated analog programming
M14 IEEE-488.2, RS-232 and isolated analog programming
M2 432-528 VAC, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye may be used
M51 Isolated analog programming Input Voltage Options. This isolation allows users to control power supplies not connected to a common ground. In addition, in systems with high ambient noise or with large ground loop currents the control ground can be isolated from the power ground eliminating problems.
M8 Internal RS-232 remote serial interface
M9D Internal IEEE-488.2 interface
Specifications & Attributes (DC Power Supplies)
Form Factor
GPIB ( /M9D )
RS232 ( /M8 )
7.5 A
3000 W
400 V

Request a Quote