EMI Test Receivers R&S ESIB
EMI measurements up to 40 GHz conforming to standards
The R&S ESIB family of EMI test receivers combines the flexibility and speed of spectrum analyzers with the large dynamic range required for EMI measurements in conformance with standards. The R&S ESIB family comprises three models with different upper frequency limits: The ESIB7 (20 Hz to 7 GHz), the ESIB26 (20 Hz to 26.5 GHz) and the ESIB40 (20 Hz to 40 GHz).
The upper frequency limit of the ESIB26 and ESIB40 can be extended up to 110 GHz by means of external mixers (option FSE-B21).
All three models are characterized by high sensitivity, excellent large-signal immunity, low measurement uncertainty and high measurement speed.
The R&S ESIB carries out measurements in conformance with all industrial and military EMI standards such as CISPR, EN, VDE, ANSI, FCC, BS, ETS, VCCI, MIL-STD, VG, DEF-STAN, DO160 and GAM EG13. It goes without saying that the EMI Test Receivers R&S ESIB family complies with the basic standard, i.e. CISPR16-1 or VDE0876, which places stringent requirements on receiver dynamic range.
The EMI Test Receivers R&S ESIB features a frequency range from 20 Hz to 7/26.5/40 GHz and 20 Hz to 1 GHz, preselection in receiver (fixed) and analyzer mode (selectable), 3 fixed-tuned and 6 or 7 tracking filters (models 26 and 40), a preamplifier with 20 dB gain in conjunction with preselector switch-selectable, resolution bandwidths from 200 Hz, 9 kHz, 120 kHz to CISPR 16-1, Parallel detectors, Peak (PK), average (AV), quasi-peak (QP) and RMS (max.4), automatic scan, 4 storable traces with up to 80000 measured values each (250000 values with one trace) and integrated controller function under Windows NT4.0.
List of Options
||Linear Video Output
||Tracking Generator 7 GHz
||Switchable Attenuator for Tracking Generator
||Ethernet interface for FSE,ESIB,ZVR/C/M/K;RJ-45 connector; with FSE FSE-B15 is required
||Second IEC/IEEE Bus Card
||Removable Hard Drive
||Preamplifier for EMI test receiver ESIB31 and ESIB40 (factory installation)
||External Mixer Output for ¸ESIB 26/40
||VECTOR SIGNAL DEMODULATOR
||Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
||Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
||Documentation of calibration values
||DKD CAL ISO 9000 CAL
||SOFTWARE EMC32 PKG
||ESIB40 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device)
||Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
||Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
||18GHZ PERAMP ANTENNA SYS
||50-75GHZ WAVEGUIDE MIXER