Keysight (Agilent) N3306A

600 Watt Electronic Load Module, 0-60V, 0-120A

Units Available for Purchase

Units currently in stock, configurations vary - Request a Quote for Details
Description
The Agilent N3306A is a 600 W (0-120A, 0-60V) electronic load module for use in either the N3300A or N3301A electronic load mainframe in system applications. The N3306A load module is fast and accurate, for programming in constant current, constant voltage, or constant resistance modes, or for making voltage, current or power measurements. The N3306A can also digitize waveforms.

Testing multiple output dc power supplies and dc-dc converters can be very time consuming if each output must be tested sequentially. If measurements are being made through a MUX using one DMM, this is what will happen. Using the built-in measurement capabilities of the N3300A electronic loads, all outputs can be measured simultaneously. Alternatively, multiple single output power sources can be tested simultaneously.

A single GPIB address is all you need for complete control and read-back of the N3306A load module within a single N3300A or N3301A mainframe. The N3306A electronic load provides fast operation and the accurate programming and read-back needed for high-volume DC power supply test systems.

Input Ratings

  • Current: 0 - 120 A
  • Voltage: 0 - 60 V
  • Maximum Power: 600 W

Constant Current Mode

  • Low Range/High Range: 12 A/120 A
  • Regulation: 10 mA
  • Low Range Accuracy: 0.1% + 15 mA
  • High Range Accuracy: 0.1% + 37.5 mA

Constant Voltage Mode

  • Low Range/High Range: 6 V/60 V
  • Regulation: 20 mV
  • Low Range Accuracy: 0.1% + 3 mV
  • High Range Accuracy: 0.1% + 8 mV

Constant Resistance Mode

  • Range 1 (I >10% of current rating): 0.017-1 ?
  • Range 2 (I >1% of current rating): 0.9-10 ?
  • Range 3 (I >0.1% of current rating): 9-100 ?
  • Range 4 (I >0.01% of current rating): 90-1000 ?
List of Options
A6J Certificate of calibration - ANSI/NCSL Z540, printed
N3300A Series Option UJ1 8mm Screw Connectors
R-50C-011-3 Agilent Calibration - 3 years
R-50C-011-5 Agilent Calibration - 5 years
R-50C-021-3 ANSI Z540-1-1994 Calibration - 3 years
R-50C-021-5 ANSI Z540-1-1994 Calibration - 5 years
R-51B-001-C Return to Agilent Warranty - 1 year
UJ1 8mm screw terminal
UJG Manually tightened connector
UK6 Commercial calibration certificate with test data included
Specifications & Attributes (Electronic Loads)
Form Factor
Plug-In
Current
120 A
Power
600 W
Voltage
60 V

Request a Quote