Anritsu 68047C

68047C 20 GHz Synthesized Sweep Signal Generator

Units Available for Purchase

Units currently in stock, configurations vary - Request a Quote for Details
Description
The Wiltron 6742A Swept Frequency Synthesizer has a frequency range of 18 to 40GHz. True analog sweep provides fast, continuous measurement over the full frequency range. The unit features automatic self-test, complete programmability via GPIB, nine CW and marker frequencies, nine video or intensity markers, and built-in pulse modulation.
List of Options
1 Rack Mounting: Rack mount kit containing a set of track slides (90° tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 48 cm equipment rack.
10 User-defined Modulation Capability (683xxC, and 693xxB): Provides user-defined waveform capability. Requires controller (not included). Includes cable and Windows® based software.
11 0.1 Hz Frequency Resolution: Provides frequency resolution of 0.1 Hz.
14 Anritsu 360B VNA Compatibility: Modifies rack mounting hardware to mate the unit in an Anritsu 360B VNA console.
15A High Power Output (680xxC, 681xxC, 690xxB and 691xxB): Adds high power RF components to the instrument in the 2-20 GHz frequency range.
15B High Power Output (683xxC and 693xxB): Adds high-power RF components to the instrument in the 220 GHz frequency range.
16 High Stability Time Base: Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base. Derate phase noise specification at 10 Hz offset by 8 dB.
17A Delete Front Panel (68100C, 68300C, 69100B and 69300B): Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed.
17B Delete Front Panel (68000C and 69000B): Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed.
18 mmWave Bias Output: Adds rear panel bias output to drive 54000-xWRxx millimeter wave source modules. BNC Twinax connector. (Not available in combination with Option 20.)
19 SCPI Programmability: Adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.21987.
20 SCAN Modulator: Adds an internal SCAN modulator for simulating high-depth amplitude modulated signals in models 68337C, 68347C, 69337B and 69347B only. Requires an external modulating signal input. (Not available in combination with Option 7, Option 18, or Option 22.)
21A (690xxB, 691xxB): Low Phase Noise, Non-pulsed Digital Downconverter replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW only from 10 MHz to 2.2 GHz
21B (693xxB): Low Phase Noise, Pulsed Digital Downconverter replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW with pulse modulation from 10 MHz to 2.2 GHz
22 0.1 Hz to 10 MHz Audio Frequency: Adds CW and step sweep frequency coverage below 10 MHz. No modulation is available below 10 MHz. Derate output power by 1 dB for =20 GHz and 2 dB for >20 GHz (Not available in combination with Option 20.)
2A Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of =20 GHz. Rated RF output power is reduced.
2B Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of = 40 GHz. Rated RF output power is reduced.
2C Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of = 50 GHz. Rated RF output power is reduced.
2D Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of = 60 GHz. Rated RF output power is reduced.
2E Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of =8.4 GHz. Rated RF output power is reduced.
2F Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of =20 GHz. Rated RF output power is reduced.
6 Phase Modulation (FM) (683xxC and 693xxB): Provides phase modulation capability. FM input, FM output and FM generator become FM/FM input, FM/FM output and FM/FM generator.
7 Delete AM/FM Generators (683xxC and 693xxB): Deletes the internal AM and FM generators. External AM and FM capability remains unchanged. (Not available in combination with Option 8 or Option 20.)
8 Internal Power Measurement (683xxC and 693xxB): Adds an internal power measurement function that is compatible with Anritsu 560-7, 5400-71 or 6400-71 series detectors. (Not available in combination with Option 7)
9 Rear Panel RF Output: Moves RF output connector to the rear panel.
Documents and Downloads

Request a Quote