Description
The HP 11729C Carrier Noise Test Set is an integral part of a phase noise measurement system. The HP 11729C can perform the following operations up converts an external (or internal) reference signal, down converts the signal under test to an intermediate frequency (IF). The phase demodulates phase noise of the test signal using the Phase Detector Method; frequency demodulates the phase noise of the test signal using the Frequency Discriminator Method.
List of Options
| 003 |
Two bands installed, 10 MHz to 1.28 GHz and 1.28 GHz to 3.2 GHz |
| 007 |
Two bands installed, 10 MHz to 1.28 GHz and 3.2 GHz to 5.76 GHz |
| 011 |
Two bands installed, 10 MHz to 1.28 GHz and 5.76 GHz to 8.32 GHz |
| 015 |
Two bands installed, 10 MHz to 1.28 GHz and 8.32 GHz to 10.88 GHz |
| 019 |
Two bands installed, 10 MHz to 1.28 GHz and 10.88 GHz to13.44 GHz |
| 023 |
Two bands installed, 10 MHz to 1.28 GHz and 13.44 GHz to16.00 GHz |
| 027 |
Two bands installed, 10 MHz to 1.28 GHz and16.00 GHz to 18.00 GHz |
| 130 |
AM Noise Measurement Capabilities |
| 140 |
Move connectors to the rear panel |
| G01 |
|
| H30 |
|
| H33 |
Switch from normal to mm |
Specifications & Attributes (Noise [Source/Figure Meter])
| Frequency |
|
1.28 GHz - 18 GHz
|
