Rohde and Schwarz FSH313

Spectrum Analyzer, Hand Held, 100 KHz to 3 GHz w/ Int. Track Gen.
Contact us for pricing and availability.
Description
The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.The tracking generator extends the R&S FSH3`s range of applications to cover distance-to-fault (DTF) measurements on cables, scalar and vector network analysis and 1-port cable loss measurement.

Features:
  • Frequency range 100 kHz to 3 GHz
  • High level accuracy : 0.5 dB typ
  • Displayed average noise level typ. -114 dBm (RBW 1KHz)
  • Resolution bandwidths 1kHz to 1 MHz, 1 and 3 steps
  • Wide range of detectors : sample, max/min peak , auto peak, RMS
  • Tracking Generator from 5 MHz to 3 GHz Supplied with:
  • Battery Pack
  • AC Power Supply
  • RS-232 Optical Intfc Cable
  • CD-ROM
  • Headphones
  • AC Mains Adapter (EU)
  • AC Mains Adapter (UK)
  • AC Mains Adapter (US)
  • Quick Start Manulal English Ver 5.0
  • List of Options
    B1 Distance To Fault measurement for FSH3/6 ( model .13/.23/.26 only), including 1 m cable (FSH-Z2 or
    C3 Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
    C5 Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
    DCV-1 Documentation of calibration values
    FSH3-DCV Calibration Documentation FSH3/FSH313/FSH323
    HZ-15 Probe set for E and H nearfield emissions 30 MHz to 3 GHz
    HZ-16 Preamplifier 100 kHz to 3 GHz, 20 dB power supply 100 - 230 V for probe HZ-15
    K1 Remote control (via RS-232) for FSH3/6
    K2 Vector reflection and transmission measurement for FSH3/6 (only model .13/.23/.26)
    K3 Receiver mode for FSH3/6
    R3 Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
    R5 Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
    RAZ Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors
    TS-EMF Isotropic Antenna 30 MHz - 3 GHz for use with Spectrum Analyzer FSH
    Z1 Average power sensor for FSHx 10 MHz - 8 GHz, 200 pW - 200 mW
    Z14 Directional power sensor 25 MHz - 1 GHz, 30 mW - 120(300)W N-female for FSHx
    Z18 Average power sensor 10 MHz - 18 GHz, 200 pW - 200 mW for FSHx
    Z2 VSWR bridge and power divider for FSH3/6 (model .13/.23/26 only) 10 MHz - 3 GHz, incl. FSH-Z29
    Z22 Serial/parallel converter for printers with parallel interface for FSH3/6/18
    Z25 Soft carrying bag for FSH3/6/18
    Z26 Hard case for FSH3/6/18
    Z29 Spare load/open/short calibration standard for FSH3/6 N-connector
    Z30 Spare open/short standard for FSH-Z2, for calibration of VSWR measurement
    Z31 Spare 50 Ohm load standard for FSH-Z2, for calibration of VSWR and DTF measurement
    Z32 Spare battery pack for FSH
    Z33 Spare power supply for FSH3/6/18 including mains plug for EU, GB and US
    Z34 Optical RS232 interface cable 1.5 m for FSH3/6/18 (spare)
    Z35 CD-ROM including FSH view software and manual for FSH3/6/18 (spare)
    Z36 Spare headphones for FSH3/6/18, additional haedphones for
    Z44 Directional power sensor 200 MHz - 4 GHz, 30mW - 120(300) W for FSHx
    Specifications & Attributes (Spectrum Analyzers)
    Form Factor
    Handheld
    Portable
    Application Software
    Cable Fault Location ( /B1 )
    Average Noise Level
    -114 dBm
    Frequency
    25 MHz - 1 GHz ( /Z14 )
    2700 MHz ( /RAZ )
    100 KHz - 3 GHz
    10 MHz - 3 GHz ( /Z2 )
    30 MHz - 3 GHz ( /HZ-15 /TS-EMF )
    200 MHz - 4 GHz ( /Z44 )
    10 MHz - 8 GHz ( /Z1 )
    10 MHz - 18 GHz ( /Z18 )

    Request a Quote