Rohde and Schwarz FSQ3

RF Spectrum Analyzer and Signal Analzer 20Hz to 3.6 GHz

Units Available for Purchase

Configuration
Condition
Qty
Price
Rohde and Schwarz FSQ3
\B4 - OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR
\K82 - CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ
\K84 - 1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ
Refurb
1
$4,995.00
Description
Key Facts The Signal Analyzer R&S FSQ combines two instruments in one. It offers signal analysis at a demodulation bandwidth of up to 120 MHz with the dynamic range of a high-end spectrum analyzer. Features
  • Frequency range: 20 Hz to 3.6 GHz, 8GHz, 26,5GHz and 40 GHz
  • Dynamic range of a high-end spectrum analyzer
  • TOI + 25 dBm, typ.
  • 1 dB compression +13 dBm, typ.
  • 84 dB ACLR/3GPP with noise correction
  • 28 MHz demodulation bandwidth (optional 120 MHz)
  • 16 Msample I and Q memory
  • Application firmware for digital demodulation measurement
  • Bluetooth
  • GSM/EDGE
  • 3 GPP WCDMA, HSDPA, TD-SCDMA
  • CDMA2000, 1xEV-DV, 1xEV-DO
  • WLAN 802.11a/b/g/j
  • WiMax IEEE 802.16-2004,802.16e
  • General purpose vector signal
List of Options
B10 External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of
B100 I/Q memory extension 235 Msamples Extendable up to 705 Msamples (Not retrofittable, excludes FSP-B10)
B102 I/Q memory extension Extends FSQ-B100 to 705 Msamples (FSQ-B100 required)
B12 Output attenuator for tracking generator for FSU, FSQ
B17 Digital Baseband Interface Not retrofittable
B18 Removable Hard Disk (not retrofittable)
B19 Second Hard Disk for FSQ-B18 (for FSQ-B18, variant 1303.0400.03)
B25 Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ
B28 Trigger port for FSP,FSQ,FSU; for indication of trigger conditions
B33 Disabled USB ports excludes FS-K9
B4 OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR
B71 Analogue base band inputs 50 Ohm/1M Ohm input impedance information bandwidth 36 MHz
B72 Bandwidth extension for IQ-Demodulation and Vectorsignalanalysis 120MHz IQ bandwidth.
B9 Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz
C3 Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5 Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
DCV-2 Documentation of calibration values
DCV-ZP Printout of DCV (additional, in combination with DCV-Option only)
DKD FSQ3 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device)
EX-IQ-BOX Digital I/O adapter module for AFQ, AMU, FMU, FSG, FSQ, SMJ, SMU (AFQ-B18, AMU-B17, AMU-B18, FSQ-B17,
FS-B33 USB mass memory write protection, disables writing to USB memory sticks (ex factory only)
FS-K10 GSM/EDGE/EDGE Evolution Measurement Appl (for FSG/FSQ/FSU)
FS-K110 Analysis of TETRA II / TEDS signals (for FSQ, FSU with option FSU-B73)
FS-K15 VOR/ILS measurements for FSMR
FS-K30 Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU
FS-K40 Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU
FS-K5 Application firmware GSM/EDGE tests for FSP, FSU, FSQ
FS-K5U Upgrade of FS-K5 to FS-K10, GSM/EDGE/EDGE Evolution Measurement Appl (for FSG, FSQ, FSU)
FS-K7 FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU)
FS-K72 Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ
FS-K73 Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ
FS-K73+ 3GPP HSPA+ UE transmitter test, application firmware (for FSMR, FSP, FSQ, FSU, FSUP,
FS-K74 3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ
FS-K74+ 3GPP HSPA plus, base station test. Application firmware (for FSP, FSQ, FSU, FSG;
FS-K76 3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU
FS-K77 3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU
FS-K8 Application firmware for Bluetooth measurement on FSP, FSU and FSQ
FS-K82 CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ
FS-K83 CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU
FS-K84 1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ
FS-K85 1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU
FS-K9 Measurements with NRP power sensors NRPZ11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4
FSP-B10 External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of
FSP-B28 Trigger port for FSP,FSQ,FSU; for indication of trigger conditions
FSU-B12 Output attenuator for tracking generator for FSU, FSQ
FSU-B25 Electronic attenuator 0 to 30 dB, Preamplifier 20 dB, 10MHz - 3.6 GHz for FSU, FSQ
FSU-B4 OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR
FSU-B5 Output for low phase noise 640MHz reference signal for FSU3, FSU8, FSQ3 und FSQ8
FSU-B88 RF hardware option 1 FSU8/FSQ8
FSU-B9 Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz
K100 EUTRA/LTE downlink, application firmware
K101 EUTRA/LTE uplink, application firmware
K102 EUTRA/LTE Downlink, MIMO. PC software for FSG and FSQ (FSQ-K100 required)
K104 Analysis of EUTRA/LTE TDD downlink signals (for FSG, FSQ)
K105 Analysis of EUTRA/LTE TDD uplink signals (for FSG, FSQ)
K30 Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU
K4 PHASE NOISE MEASUREMENT S/W
K40 Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU
K5 Application firmware GSM/EDGE tests for FSP, FSU, FSQ
K7 FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU)
K70 Vector signal analysis for FSQ; 28 MHz demodulator-BW FSK, MSK, PSK,
K72 Application firmware 3GPP-FDD BTS transmitter test for FSMR, FSP, FSU, FSQ
K73 Application firmware 3GPP-FDD UE transmitter test for FSMR, FSP, FSU, FSQ
K74 3GPP HSDPA base station test application firmware for FSMR, FSU, FSP, FSQ
K76 3GPP TD-SCDMA base station test; application firmware for FSMR, FSP, FSQ, FSU
K77 3GPP TD-SCDMA mobile station test; application firmware for FSMR, FSP, FSQ, FSU
K8 Application firmware for Bluetooth measurement on FSP, FSU and FSQ
K82 CDMA2000/1xEV-DV base station test application firmware for FSMR, FSP, FSU, FSQ
K83 CDMA2000/1xEV-DV mobile station application firmware for FSMR, FSP, FSQ, FSU
K84 1xEV-DO base station test application firmware for FSMR, FSU, FSP, FSQ
K85 1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU
K9 Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4
K90 Application firmware WLAN 802.11A TX tests (EMV, flatness, mask) for FSQ
K90U Upgrade from FSQ-K90 to FSQ-K91, 802.11A,B,G,J TX tests requires 512 MB memory
K91 Application firmware WLAN 802.11A,B,G,J TX tests requires 512 MB memory
K91N Upgrade of FSQ-K91 to 802.11n
K92 Application firmware WIMAX (802.16-2004) TX measurements
K92U Upgrade of FSQ-K92 to FSQ-K93
K93 Application firmware for WIMAX IEEE 802.16e, WIBRO
K94 Application firmware for WIMAX IEEE 802.16e-2005 MIMO
K96 Generic OFDM measurement demodulator. Selectable pilot and data carriers and modulation type
Q3-DKD ISO 9000 Calibration / data
R3 REPAIR SERVICE 3 YEARS
R5 Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
U3 CPU board upgrade and 1.5GB memory extension for FSQ without flash drive FSQ-B18
Z2 Compact Keyboard with Trackball
Z4 DC Block 10 KHz - 18 GHz N Connector 50 Ohm, 50 VDC
Z5 2.4 mm Test Port Adapter
ZZA-411 19" adapter, 4 HU, 1/1 for BW2000 cabinets
Specifications & Attributes (Spectrum Analyzers)
Form Factor
Benchtop
Plug-In ( /EX-IQ-BOX )
Application Software
Bluetooth ( /K8 )
CDMA2000 ( /K82 )
CDMAONE ( /K82 )
GSM with Edge ( /K5 )
HSDPA ( /K74 )
MIMO (802.11n) ( /K102 /K91N /K94 )
Noise Figure ( /K30 )
Phase Noise ( /K4 )
TD-SCDMA ( /K77 )
Average Noise Level
25 dBm
Frequency
10 MHz ( /B4 )
28 MHz ( /K70 )
36 MHz ( /B71 )
120 MHz ( /B72 )
640 MHz ( /FSU-B5 )
20 Hz - 3.6 GHz
10 MHz - 3.6 GHz ( /B25 )

Request a Quote