Description
The Model 10S1G4 is a solid state, self-contained, air-cooled, broadband amplifier designed for applications
where instantaneous bandwidth and high gain are required. Housed in a stylish contemporary cabinet, the
unit is designed for benchtop use, but can be removed from the cabinet for immediate equipment rack
mounting. The 10S1G4, when used with a sweep generator, will provide a minimum of 10 watts of RF power.
Included is a front panel gain control which permits the operator to conveniently set the desired output level.
The 10S1G4 is protected from RF input overdrive by an RF input leveling circuit which controls the RF input
level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF amplifier stages
are protected from over temperature by removing the DC voltage to them if an over temperature condition
occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the
operate status and fault conditions when an overtemperature or power supply fault has occurred. The unit can
be returned to operate when the condition has been cleared. The 10S1G4 includes digital control for both
local and remote control of the amplifier. This 8-bit RISC microprocessor controlled board provides both IEEE488 (GPIB) and asynchronous, full duplex RS-232 control of all amplifier functions.
Specifications & Attributes (Amplifiers)
Frequency |
0.8 GHz - 4.2 GHz
|