Outline
The PLZ-4W Series Electronic Load unit is a multifunctional system designed to offer the highest levels of reliability and safety with operation function of constant voltage, constant current, constant power and constant resistance mode. And its control unit comes with GPIB, RS232C and USB as standard equipment, available in 5 models.
A 0(Zero)V input operating voltage is available in 2 models (PLZ164WA, PLZ664WA) which are suitable to meet the testing demands for the Fuel Cell, DC/DC converter, SW Power Supply, and any other devices required for the lower operating voltage application. Model PLZ664WA offers the 132A at 0V input as a largest current rating in its class. ( 33A for model PLZ164WA)
Furthermore, the PLZ-4W features high speed slew rate when switching, it can be used as simulating load for the characteristic, performance, life cycle, aging test in the field of application in Automobile electronics, SW Power Supply manufacturer, Secondary Battery.
To achieve large capacity for testing application at low cost, PLZ1004W can be expanded up to 9kW by using its 2kW booster unit (PLZ2004WB).
Features
Lineup
Model | Specification |
---|---|
PLZ164W |
DC Electronic Load (E-Load), 1.5 to 150V, 33A, 165W , Rise time: 10 µ second(which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard) |
PLZ164WA | DC Electronic Load (E-Load), 0 to 150V, 33A, 165W , Rise time: 10 µs (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard) |
PLZ334W | DC Electronic Load (E-Load), 1.5 to 150V, 66A, 330W , Rise time: 10 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard) |
PLZ664WA | DC Electronic Load (E-Load), 0 to 150V, 132A, 660W , Rise time: 10 µ s (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard) |
PLZ1004W | DC Electronic Load (E-Load), 1.5 to 150V, 200A, 1000W , Rise time: 10 µs (which converts to rise and fall times) high-speed response, Possible to perform actual Load simulation by sequence control function, Equipped with USB (Supplied as standard) |
PLZ2004WB | 2000W booster unit for model PLZ1004W dc electronic load (E-Load). Using 1 PLZ1004W as a master unit, a maximum of 4 booster units can be parallel connected. (Max. 9kW, 1800A) *PLZ2004WB can be used for the PLZ1004W only. It cannot be connected and used with any other model. |
408J-101 | GPIB cable, length: 1m |
408J-102 | GPIB cable, length: 2m |
408J-104 | GPIB cable, length: 4m |
KBP3-10 | Blank panel for KRA3 or150, width:1/10 |
KBP3-11 | Blank panel for KRA3 or150, width:1/11 |
KRA1026 | Rack adapter (Metric size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More... |
KRA1173 | Rack adapter (Inch size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More... |
KRB150-TOS | Bracket (Metric size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PAT |
KRB154 | Bracket (Metric size) More... |
KRB3-TOS | Bracket (Inch size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PATMore... |
OP01-PLZ-4W | Accessory Kit for PLZ-4W series. Used for the connection of J1 Connector on the rear panel when operating by external control. Contents: Connector, Semi-cover, Pin(20 sets), Ground cable |
PC01-PLZ-4W | The control signal cable for parallel operation of PLZ-4W series (Used for between Master/Slave units (PLZ-4W) or between PLZ2004WB Booster units) or PLZ6000R |
PC02-PLZ-4W | The control signal cable for parallel operation of PLZ-4W series, Used for between PLZ-4W Master unit and Booster unit (PLZ2004WB). |
Wavy for PLZ-4W | Sequence Creation Software for PLZ-4W seriesMore... |
Form Factor |
---|
Benchtop |
Portable |
Power |
---|
9 kW |
Voltage |
---|
0 V |