Kikusui PLZ664WA
Electronic Load, 150V, 132A, 660W(CC/CV/CR/CP/Zero Input)
Contact us for pricing and availability.
Description
The PLZ-4W/4WA Series Electronic Loads are designed for integration in test systems for both characteristic and lifetime tests of a variety of DC power sources, such as switching power supplies, primary/secondary batteries, and Fuel Cell stacks.
The PLZ-4W series have six operation modes: Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Resistance + Constant Voltage (CR+CV).
The PLZ-4W/WA Series consists of four models plus a booster unit PLZ2004WB.
To achieve a large capacity system at low cost, the PLZ1004W can be connected in parallel with up to four booster units for a total power of maximum 9kW /1800A. Moreover, up to 5 units of the same model can be connected in parallel in a Master / Slave configuration.
With a high-performance current control circuit incorporated, the PLZ-4W/Wa series provide highly stable, high-speed operation. All models are standard equipped with GPIB, USB and RS232C Interface for esay remote control and system integration.
The PLZ-164WA accepts DC input voltages of 0V, making it ready for characterization of fuel cells.
The PLZ-4W series have six operation modes: Constant Current (CC), Constant Resistance (CR), Constant Voltage (CV), Constant Power (CP), Constant Current + Constant Voltage (CC+CV) and Constant Resistance + Constant Voltage (CR+CV).
The PLZ-4W/WA Series consists of four models plus a booster unit PLZ2004WB.
To achieve a large capacity system at low cost, the PLZ1004W can be connected in parallel with up to four booster units for a total power of maximum 9kW /1800A. Moreover, up to 5 units of the same model can be connected in parallel in a Master / Slave configuration.
With a high-performance current control circuit incorporated, the PLZ-4W/Wa series provide highly stable, high-speed operation. All models are standard equipped with GPIB, USB and RS232C Interface for esay remote control and system integration.
The PLZ-164WA accepts DC input voltages of 0V, making it ready for characterization of fuel cells.
List of Options
| 408J-101 | GPIB cable, length: 1m |
| 408J-102 | GPIB cable, length: 2m |
| 408J-104 | GPIB cable, length: 4m |
| KBP3-8 | Blank panel for KRA3 or150, width:1/8 |
| KBP3-9 | Blank panel for KRA3 or150, width:1/9 |
| KRA732 | Rack adapter (Metric size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More... |
| KRA879 | Rack adapter (Inch size) *Applicable series name: PWR, PAS, PMR, PMP, PAK-A, PMC, PMC-A, PCR500M, PLZ-4W, PLZ-3W/3WH, PIA4800More... |
| KRB150-TOS | Bracket (Metric size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PAT |
| KRB153 | Bracket (Metric size) More... |
| KRB3-TOS | Bracket (Inch size) for TOS9200, TOS9201, TOS8870A, PAM(2kW type), PCR1000M, PLZ-4W, PWR, PATMore... |
| OP01-PLZ-4W | Accessory Kit for PLZ-4W series. Used for the connection of J1 Connector on the rear panel when operating by external control. Contents: Connector, Semi-cover, Pin(20 sets), Ground cable |
| PC01-PLZ-4W | The control signal cable for parallel operation of PLZ-4W series (Used for between Master/Slave units (PLZ-4W) or between PLZ2004WB Booster units) or PLZ6000R |
| PC02-PLZ-4W | The control signal cable for parallel operation of PLZ-4W series, Used for between PLZ-4W Master unit and Booster unit (PLZ2004WB). |
| Wavy for PLZ-4W | Sequence Creation Software for PLZ-4W seriesMore... |
Specifications & Attributes (Electronic Loads)
| Form Factor |
|---|
| Benchtop |
| Portable |
| Power |
|---|
| 4 W |