The DDX 9101 partial discharge detector comes from the
very successful family of DDX detectors. It is the ideal
solution for pass/fail partial discharge testing; incorporating
all the basic functions of an analog detector and meets all IEC
and IEEE/ANSI standards for PD testing. We’ve eliminated the
costly advanced features associated with fully computerized PD
detectors. The DDX9101 simply measures the level of PD and
the applied test voltage. It’s designed to help you modernize
your facility at an affordable price, and it’s simple to operate.
The DDX9101 a straightforward replacement for older analog
detectors of any make or model. The system is housed in a
3U 19” rack mount case designed to slide into a rack cabinet.
Or, if you need a complete new test system, the detector can
be integrated into an AC power supply for production PD
testing of HV components.
This simple-to-use detector is controlled via 8 control buttons
on the front panel. To operate the detector, select the desired
operation mode (magnitude meter or oscilloscope mode) and
choose the appropriate amplifier settings. Calibrate the
measurement setup, set the maximum acceptable PD level
and you are ready to start the test. Once voltage is applied to
the test object, an indicator on the screen tells you if the test
object passes or fails the test.
With the data acquisition / remote control software and a PC
(optional) the capabilities of the unit are greatly expanded. All
data is acquired during the test according to user-defined
parameters, the data can then be used to generate customized
test reports with graphs and charts. The user can also take
“snapshots” of the ellipse any time during a test. It’s just like
that camera on your old analog scope, only easier.
The most distinguishing feature of the DDX9101 advanced
software is its ability to operate and monitor multiple
detectors simultaneously. If you are a manufacturer
performing routine PD tests in multiple bays, each DDX9101
can now be linked to a single PC enabling remote controls,
monitoring and acquisition of all data.
Features:
- Settable PD threshold with indicator light when limit is exceeded
- Ethernet port for communication with a PC (optional)
- Data acquisition and remote control software package
- Two modes of operation - meter mode or scope mode
- Compact, 3U (19”) rack mount case is ideal for integrating into a test system