The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 8.5, 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.
Key Features
007 | Automatic Fixture Removal |
008 | Pulsed-RF measurements |
010 | Time-domain measurements |
014 | Configurable Test Set Option (front panel access loops between source output and coupler input) Standard Option |
016 | Add Reciever Attenuators (35 dB in 5 dB steps)(Standard Option) |
020 | Add IF inputs |
021 | Add pulse modulator to internal first source |
022 | Add pulse modulator to internal second source |
025 | Add four internal pulse generators |
028 | Noise figure measurements using standard receivers |
029 | Fully-corrected noise-figure measurements to 8.5 GHz |
080 | Frequency offset measurements |
081 | Reference Channel Switch (Adds internal switch to R1 Path)(Standard Option w/080) |
082 | Scalar calibrated converter measurements |
083 | Vector and scalar calibrated converter measurements |
086 | Gain compression application |
087 | Intermodulation distortion measurements |
088 | Source phase control |
118 | Fast CW mode |
1A7 | Calibration + Uncertainties + Guardbanding |
1CM | Rack mount kit for installation without handles |
1CP | Rack mount kit for installation with handles |
200 | 2 ports, single source |
219 | Add extended power range and bias-tees to 2 port analyzer |
224 | Add internal second source, combiner and mechanical switches to 2-port analyzer |
301 | Application for use with standard CalPods |
302 | Application for use with temperature-characterized CalPods |
303 | Multiport capability for CalPods |
400 | 4 ports, dual source |
419 | Add extended power range and bias-tees to 4 port analyzer |
423 | Add internal combiner and mechanical switches to 4-port analyzer |
460 | Integrated true-mode stimulus application |
510 | Nonlinear component characterization, full frequency range |
514 | Nonlinear X-Parameters |
518 | Nonlinear Pulse Envelope Domain |
520 | Arbitrary load impedance X-parameters |
551 | N-port calibrated measurements |
629 | Noise figure accessories |
897 | Built-in performance test software for inclusive calibration, perpetual license |
898 | Built-in performance test software for standards compliant calibration, perpetual license |
A6J | ANSI Z540-1-1994 Calibration |
H08 | Pulsed - RF Measurements |
H85 | Removes bias tees between source attenuators and test port couplers |
N1966A | Pulse/IO Adapter |
N6171A | MATLAB Software |
N6171A-M01 | MATLAB-Basic Package, individual license - node-locked |
N6171A-M02 | MATLAB-Standard Package, individual license - node-locked |
N6171A-M03 | MATLAB-Advanced Package, individual license - node-locked |
UK6 | Commercial calibration certificate with test data |
UNL | High Power Measurement w/ Bias tees Configuration (Allows Ext. Amplifiers between RF Source and Coupler Input)(Standard Option) |
Form Factor |
---|
Benchtop |
Rackmount ( /1CP ) |
Frequency |
---|
10 MHz - 8.5 GHz |