The Tektronix P6206 is an active 10X-attenuating probe that is compatible with tektronix TDS800 Series digitizing oscilloscopes. With the P6206 FET prove you can make high frequency measurements without the capacitive loading and performance limitations inherent in a passive resistive divider probe. The P6206 uses FETs to establish the high input impedance at high frequencies that is characteristic of active probes. The P6206 has a bandwidth of 1 GHz and an input impedance of 1 Mohm in parallel with 2 pF. The P6206 output must be terminated into 50 Ohm. The P6206 features the TEKPROBE SMA Level 2 interface. When used with a compatible oscilloscope the probe is powered by the host instrument and provides the oscilloscope with the probe model number, serial number, and attenuation factor. Oscilloscope display readouts are corrected for the probe attenuation factor.