| B10 |
External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of |
| B102 |
100 KHz - 2.2 GHz |
| B103 |
100 KHz - 3 GHz |
| B104 |
100 KHz - 4 GHz |
| B105 |
100 KHz - 6 GHz |
| B11 |
Baseband Generator with ARB (64 Msample) and Digital Modulation (realtime |
| B12 |
Output attenuator for tracking generator |
| B13 |
Baseband Main Module |
| B14 |
Fading Simulator |
| B15 |
Fading Simulator Extension |
| B16 |
Differential I/Q Output |
| B17 |
Analog Baseband Input |
| B18 |
Removable Hard Disk (Flash Card) for R&S® ESU |
| B19 |
Second Hard Disk (Flash Card) for R&S® ESU-B18 |
| B20 |
FM/ Ø Modulation |
| B202 |
RF Path B 100 KHz - 2.2 GHz |
| B203 |
RF Path B 100 KHz - 3 GHz |
| B22 |
FM/ Ø Modulation w/ Enhanced Phase Noise Performance |
| B24 |
Internal preamplifier 100kHz to 40GHz; gain 30dB nominal (For EMI Test Receiver R&S® ESU40; |
| B30 |
Overvoltage Protection |
| B31 |
High Output Power |
| B32 |
Overvoltage Protection and High Output Power |
| B35 |
RF Path B Overvoltage Protection |
| B36 |
RF Path B High Output Power |
| B37 |
RF Path B Overvoltage Protection and High Output Power |
| B4 |
OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR |
| B81 |
Rear panel connectors for 1st RF path |
| B82 |
Rear panel connectors for 2nd RF path |
| B9 |
Baseband Generator with ARB (128 Msample) and Digital Modulation (realtime |
| C3 |
Three years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s). |
| C5 |
Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s). |
| DCV-2 |
Documentation of calibration values |
| DCV-ZP |
Printout of DCV (additional, in combination with DCV-Option only) |
| DKD |
ESU40 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| ESPIK50 |
Trigger for coverage measurements with EMI Test Receivers R&S ESPI and R&S ESU |
| ESU26-DKD |
ESU26 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| ESU8-DKD |
ESU8 DKD (ISO17025) calibration incl. ISO 9000 calibration (order only with device) |
| FS-K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
| FSP-B10 |
External generator control for FSP, FSU, FSG, FSQ, ESU, ESCI, ESPI and for retrofit of |
| FSU-B12 |
Output attenuator for tracking generator for FSU, FSQ |
| FSU-B4 |
OCXO 10 MHz aging/year: 0.35*10E-7 for FSU, FSQ, FSMR |
| FSU-B9 |
Tracking generator for FSU and FSQ, 100 kHz - 3.6 GHz |
| K11 |
Dig. Std. IS-95 |
| K12 |
Dig. Std. cdma2000 |
| K40 |
Digital standard GSM/EDGE, 1160.7609.02 |
| K42 |
Dig. Std. 3GPP FDD |
| K43 |
Dig. Std. 3GPP Enh. BS/MS Test incl. HSDPA |
| K47 |
Dig. Std. 1xEV-DO |
| K53 |
Time Domain Scan FFT based scan for very fast overview measurements |
| K55 |
Dig. Std. E-UTRA |
| K62 |
Additive White Gaussian Noise (AWGN) |
| K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
| R3 |
Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
| R5 |
Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
