Rohde and Schwarz FSH606

Spectrum Analyzer, Hand Held, 100 KHz to 6 GHz w/ preamp.
Contact us for pricing and availability.
Description
The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.The tracking generator extends the R&S FSH6's range of applications to cover distance-to-fault (DTF) measurements on cables, scalar and vector network analysis and 1-port cable loss measurement.

Features:
  • Frequency range 100 kHz to 6 GHz
  • High level accuracy : 0.5 dB typ
  • Displayed average noise level typ. -114 dBm (RBW 1KHz)
  • Resolution bandwidths 1kHz to 1 MHz, 1 and 3 steps
  • Wide range of detectors : sample, max/min peak , auto peak, RMS
  • Tracking Generator from 5 MHz to 3 GHz

Supplied with:
  • Battery Pack
  • AC Power Supply
  • RS-232 Optical Intfc Cable
  • CD-ROM
  • Headphones
  • AC Mains Adapter (EU)
  • AC Mains Adapter (UK)
  • AC Mains Adapter (US)
  • Quick Start Manulal English Ver 5.0

List of Options
C3 Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5 Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
DCV-1 Documentation of calibration values
FSH-K3 Receiver mode for FSH3/6
FSH-Z25 Soft Carrying Bag
HZ-15 Probe set for E and H nearfield emissions 30 MHz to 3 GHz
HZ-16 Preamplifier 100 kHz to 3 GHz, 20 dB power supply 100 - 230 V for probe HZ-15
K1 Remote control (via RS-232) for FSH3/6
K2 Vector reflection and transmission measurement for FSH3/6 (only model .13/.23/.26)
R3 Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
R5 Five years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty.
RAZ Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors
TS-EMF Isotropic Antenna 30 MHz - 3 GHz for use with Spectrum Analyzer FSH
Z1 Average power sensor for FSHx 10 MHz - 8 GHz, 200 pW - 200 mW
Z14 Directional power sensor 25 MHz - 1 GHz, 30 mW - 120(300)W N-female for FSHx
Z18 Average power sensor 10 MHz - 18 GHz, 200 pW - 200 mW for FSHx
Z22 Serial/parallel converter for printers with parallel interface for FSH3/6/18
Z25 Soft carrying bag for FSH3/6/18
Z26 Hard case for FSH3/6/18
Z3 VSWR bridge with DC BIAS and bypass switch. 10 MHz - 6 GHz for FSH3/6 (only model .13/.23/.26)
Z32 Spare battery pack for FSH
Z33 Spare power supply for FSH3/6/18 including mains plug for EU, GB and US
Z34 Optical RS232 interface cable 1.5 m for FSH3/6/18 (spare)
Z35 CD-ROM including FSH view software and manual for FSH3/6/18 (spare)
Z36 Spare headphones for FSH3/6/18, additional haedphones for
Z37 Optical USB interface cable, 1.5 m for FSH3/6/18 (spare)
Z44 Directional power sensor 200 MHz - 4 GHz, 30mW - 120(300) W for FSHx
Specifications & Attributes (Spectrum Analyzers)
Form Factor
Handheld
Portable
Application Software
Cable Fault Location
Average Noise Level
-114 dBm
Frequency
25 MHz - 1 GHz ( /Z14 )
2700 MHz ( /RAZ )
100 KHz - 3 GHz ( /HZ-16 )
30 MHz - 3 GHz ( /HZ-15 /TS-EMF )
200 MHz - 4 GHz ( /Z44 )
100 KHz - 6 GHz
10 MHz - 6 GHz ( /Z3 )
10 MHz - 8 GHz ( /Z1 )
10 MHz - 18 GHz ( /Z18 )

Request a Quote