1. Home
  2. Test Equipment Sales
  3. Rohde and Schwarz
  4. Spectrum Analyzers
  5. FSH626

Rohde and Schwarz FSH626

Spectrum Analyzer, Hand Held, 100 KHz to 6 GHz w/ Preamp + Int. Track Gen.
Contact us for pricing and availability.
Description
The FSH is the ideal spectrum analyzer for rapid, high-precision, cost-effective signal investigations. It provides a large number of measurement functions and so can handle anything from the installation or maintenance of a mobile radio base station up to on-site fault location in RF cables as well as development and service -an extensive range of applications. Due to its excellent characteristics, the FSH is used on board the International Space Station (ISS) for distance-to-fault measurements on RF antenna cables.The tracking generator extends the R&S FSH6`s range of applications to cover distance-to-fault (DTF) measurements on cables, scalar and vector network analysis and 1-port cable loss measurement.

Features:
  • Frequency range 100 kHz to 6 GHz
  • High level accuracy : 0.5 dB typ
  • Displayed average noise level typ. -114 dBm (RBW 1KHz)
  • Resolution bandwidths 1kHz to 1 MHz, 1 and 3 steps
  • Wide range of detectors : sample, max/min peak , auto peak, RMS
  • Tracking Generator from 5 MHz to 3 GHz
Supplied with:
  • Battery Pack
  • AC Power Supply
  • RS-232 Optical Intfc Cable
  • CD-ROM
  • Headphones
  • AC Mains Adapter (EU)
  • AC Mains Adapter (UK)
  • AC Mains Adapter (US)
  • Quick Start Manulal English Ver 5.0
List of Options
61532 ANRITSU ANTENNA KIT 61532
B1 Distance To Fault measurement for FSH3/6 ( model .13/.23/.26 only), including 1 m cable (FSH-Z2 or
C3 Three years of depot calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 2 additional depot calibration(s).
C5 Five years of calibration coverage based on the R&S recommended calibration interval - includes test data. The first calibration is included with product delivery with 4 additional depot calibration(s).
DCV-1 Documentation of calibration values
HZ-15 Probe set for E and H nearfield emissions 30 MHz to 3 GHz
HZ-16 Preamplifier 100 kHz to 3 GHz, 20 dB power supply 100 - 230 V for probe HZ-15
K1 Remote control (via RS-232) for FSH3/6
K2 Vector reflection and transmission measurement for FSH3/6 (only model .13/.23/.26)
K3 Receiver mode for FSH3/6
R3 Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty
R5 FIVE YEARS OF DEPOT COVERAGE, INCLUDING RECALIBRATION AND TEST DATA IF NECESSARY TO COMPLETE THE REPAIR. FIRST YEAR OF REPAIR COVERAGE IS PROVIDED BY THE 12-MONTH NEW PRODUCT WARRANTY.
RAZ Matching pad 50/75 Ohm, 0 - 2700 MHz, matching at one end, N-connectors
TS-EMF Isotropic Antenna 30 MHz - 3 GHz for use with Spectrum Analyzer FSH
Z1 Average power sensor for FSHx 10 MHz - 8 GHz, 200 pW - 200 mW
Z14 Directional power sensor 25 MHz - 1 GHz, 30 mW - 120(300)W N-female for FSHx
Z18 Average power sensor 10 MHz - 18 GHz, 200 pW - 200 mW for FSHx
Z2 VSWR bridge and power divider for FSH3/6 (model .13/.23/26 only) 10 MHz - 3 GHz, incl. FSH-Z29
Z20 Spare N-cable to option DTF FSH-B1, 1 m, male/female N-connector up to 6 GHz
Z22 Serial/parallel converter for printers with parallel interface for FSH3/6/18
Z25 Soft carrying bag for FSH3/6/18
Z26 Hard case for FSH3/6/18
Z28 Spare part load/short/open calibration standard for FSH3/6 DC to 6 GHz, N connector
Z29 Spare load/open/short calibration standard for FSH3/6 N-connector
Z3 VSWR bridge with DC BIAS and bypass switch. 10 MHz - 6 GHz for FSH3/6 (only model .13/.23/.26)
Z30 Spare open/short standard for FSH-Z2, for calibration of VSWR measurement
Z31 Spare 50 Ohm load standard for FSH-Z2, for calibration of VSWR and DTF measurement
Z32 Spare battery pack for FSH
Z33 Spare power supply for FSH3/6/18 including mains plug for EU, GB and US
Z34 Optical RS232 interface cable 1.5 m for FSH3/6/18 (spare)
Z35 CD-ROM including FSH view software and manual for FSH3/6/18 (spare)
Z36 Spare headphones for FSH3/6/18, additional haedphones for
Z37 Optical USB interface cable, 1.5 m for FSH3/6/18 (spare)
Z44 Directional power sensor 200 MHz - 4 GHz, 30mW - 120(300) W for FSHx
Specifications & Attributes (Spectrum Analyzers)
Form Factor
Handheld
Application Software
Cable Fault Location ( /B1 )
Average Noise Level
-114 dBm
Frequency
25 MHz - 1 GHz ( /Z14 )
2700 MHz ( /RAZ )
100 KHz - 3 GHz ( /HZ-16 )
10 MHz - 3 GHz ( /Z2 )
30 MHz - 3 GHz ( /HZ-15 /TS-EMF )
200 MHz - 4 GHz ( /Z44 )
6 GHz ( /Z20 /Z28 )
100 KHz - 6 GHz
10 MHz - 6 GHz ( /Z3 )
10 MHz - 8 GHz ( /Z1 )
10 MHz - 18 GHz ( /Z18 )

Request a Quote