38 |
Rack Mount Kit with installation (Customer will be issued RMA to send FSP-38 in for modification after receipt of product) |
B1 |
Rugged Chassis |
B10 |
External Generator Control |
B15 |
Pulse calibrator (required for FS-K7x) |
B16 |
LAN interface 10/100 base T for FSP 1164.4391.XX and ESPI 1164.6407.XX |
B18 |
Removable hard disk with WinXP (factory installed) |
B19 |
Second hard disk for FSP-B18 analyzer firmware for FSP with WinXP included |
B20 |
Extended environmental specification |
B21 |
LO/IF Ports for External Mixers (only for FSP40) |
B25 |
Electronic Attenuator and integrated preamplifier (3.6 GHz) |
B28 |
Trigger port for R&S FSP for indication of trigger conditions |
B29 |
20 Hz frequency extension to FSP13 and FSP30 not retrofittable |
B3 |
Audio demodulator AM/FM for FSP internal speaker, control and phones connection |
B30 |
DC power supply 12 - 28 V for FSP spectrum analyzer and ESPI test receiver |
B31 |
NiMH battery pack + charger for FSP and ESPI requires FSP-B1 and FSP-B30 |
B32 |
Spare Battery Pack (NiMH) option B31 required |
B33 |
USB mass memory write protection, disables writing to USB memory sticks (ex factory only) |
B4 |
Improved aging OCXO |
B6 |
TV trigger and adjustable RF power trigger (40 dB) for FSP |
B70 |
Demodulation hardware and memory extension (required for FS-K7x) |
B9 |
Tracking generator for FSP 9 kHz - 3 GHz, I/Q modulator |
K30 |
Application firmware for noise figure and gain measurements for FSMR, FSP, FSQ, FSU |
K40 |
Application firmware for phase noise measurements for FSMR, FSP, FSQ, FSU |
K5 |
GSM/EDGE Application Firmware |
K7 |
FM demodulator, allows measurement of FM specific parameters (for FMU, FSP, FSU) |
K72 |
3GPP BTS/Node B FDD Application Firmware |
K73 |
3GPP UE FDD Application Firmware |
K73+ |
3GPP HSPA+ UE Application Firmware |
K74 |
3GPP HSDPA BTS Application Firmware |
K74+ |
3GPP HSPA+ BTS Application Firmware |
K76 |
3GPP TD-SCDMA BTS Application Firmware |
K77 |
3GPP TD-SCDMA UE Application Firmware |
K8 |
Bluetooth® Application Firmware |
K82 |
CDMA2000® / IS-95 (cdmaOne) / 1xEV-DV BTS |
K83 |
CDMA2000®/1xEV-DV MS Application Firmware |
K84 |
CDMA2000®/1xEV-DO BTS Application Firmware |
K85 |
1xEV-DO mobile station test application firmware for FSMR, FSP, FSQ, FSU |
K9 |
Measurements with NRP power sensors NRP-Z11/Z21/Z22/Z23/Z24/Z51/Z55/Z91 requires NRP-Z3 or NRP-Z4 |
K90 |
WLAN 802.11a Application Firmware |
K93 |
WiBro Application Firmware |
R3 |
Three years of depot repair coverage, including re-calibration if necessary to complete the repair. First year of repair coverage is provided by the 12-month new product warranty. |
ZA9 |
N-type Adapter for R&S®RT-Zxx Probes |